[PATCH 0/2] Add driver for DAC8163:

[Lukas Metz]

This series adds an IIO driver for the Texas Instruments DAC7562, DAC7563,
DAC8162, DAC8163, DAC8562, and DAC8563 dual-channel voltage-output DACs.

These devices are pin-compatible 12-, 14-, and 16-bit variants sharing the
same 24-bit SPI command interface. Each device provides two independently
addressable output channels and includes a 2.5 V, 4 ppm/°C internal
reference that can be enabled via device tree, or an external reference
supplied through a regulator. The register and command structure differs
from already existing drivers which makes adding a new driver a
reasonable choice in my opinion.

The driver supports:
 - All six device variants via a shared chip info table
 - DAC updates in synchronous mode
 - Configurable internal or external voltage reference
 - Optional LDAC GPIO which has to be asserted permanently when using
   synchronous updates.
 - IIO_CHAN_INFO_RAW and IIO_CHAN_INFO_SCALE attributes per channel

Datasheet (DAC8163):
  https://www.ti.com/lit/gpn/dac8163

The driver was tested with a DAC8163 on a custom STM32MP157F board with
external reference enabled.

Signed-off-by: Lukas Metz <lukas.metz@xxxxxxx>
---
Lukas Metz (2):
      iio: dac: dac8163: Add driver for DAC8163
      dt-bindings: iio: dac: Add DAC8163

 .../devicetree/bindings/iio/dac/ti,dac8163.yaml    |  75 +++++
 MAINTAINERS                                        |   7 +
 drivers/iio/dac/Kconfig                            |  10 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/ti-dac8163.c                       | 339 +++++++++++++++++++++
 5 files changed, 432 insertions(+)
---
base-commit: 76b6720279964612111352ca5d09f5bd61e41ce4
change-id: 20260413-dac8163-work-2138a775b515

Best regards,
--  
Lukas <lukas.metz@xxxxxxx>