Re:[PATCH 1/2] dt-bindings: hwmon: chipcap2: Add label property

[Flaviu Nistor]

On Mon Jun 22, 2026 at 7:29 PM CEST, Javier Carrasco wrote:
>On Mon Jun 22, 2026 at 2:21 PM CEST, Flaviu Nistor wrote:
>> Add support for an optional label property similar to other hwmon devices
>> This allows, in case of boards with multiple CHIPCAP2 sensors, to assign
>> distinct names to each instance.
>>
>> Signed-off-by: Flaviu Nistor <flaviu.nistor@xxxxxxxxx>
>> ---
>>  .../devicetree/bindings/hwmon/amphenol,chipcap2.yaml         | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.ya=
>ml b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
>> index 17351fdbefce..f00b5a4b14dd 100644
>> --- a/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
>> +++ b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
>> @@ -33,6 +33,10 @@ properties:
>>    reg:
>>      maxItems: 1
>>
>> +  label:
>> +    description:
>> +      A descriptive name for this channel, like "ambient" or "psu".
>> +
>>    interrupts:
>>      items:
>>        - description: measurement ready indicator
>> @@ -72,6 +76,7 @@ examples:
>>                           <5 IRQ_TYPE_EDGE_RISING>,
>>                           <6 IRQ_TYPE_EDGE_RISING>;
>>              interrupt-names =3D "ready", "low", "high";
>> +            label =3D "somelabel";
>>              vdd-supply =3D <&reg_vdd>;
>>          };
>      };
>
>Hello Falviu, thank you for your patch.
>

Hello Javier, thanks for your reply.

>Should we not add a reference to hwmon-common.yaml (with
>unevelautedProperties instead of additionalProperties), as label is
>defined there? I believe that Krzysztof Kozlowski did something similar
>for the shunt-resistor-micro-ohms property. Could we follow suit here?
>

This is a good question and I am happy you asked. I also thought a lot
about this and the reason I decided to go for this approach is that by using
$ref: hwmon-common.yaml#, I would have to change additionalProperties: false
to unevaluatedProperties: false, which will evaluate in case it is used, also
shunt-resistor-micro-ohms property which does not apply to this sensor. At
least this is my understanding, but of course I can be wrong (I see lm75 binding
also uses $ref: hwmon-common.yaml# but shunt-resistor-micro-ohms does not apply). 

>I am also not a big fan of a name like "somelabel", and a more
>meaningful name from a "real" example would look better. I know that
>some examples have already used "somelabel" as an example, but others
>have used more meaningful names too.
>

I will have to send a v2 since for the label property description I used
"channel" instead of "sensor" (detected by Sashiko AI review), so I can
use in the example section a more meaningful name like "Room" if no other
suggestion.

>Best regards,
>Javier Carrasco

Best regards,
Flaviu Nistor