Re: [PATCH v3 1/7] dt-bindings: serial: 8250: aspeed: add compatible string for ast2600

[Krzysztof Kozlowski]

On Tue, Jun 23, 2026 at 02:25:39PM +0000, Grégoire Layet wrote:
> The ast2600 was using the ast2500 vuart compatible string.
> This change makes it possible to have ast2600-specific properties.
> 
> Signed-off-by: Grégoire Layet <gregoire.layet@xxxxxxxxxxxxx>

Do not attach (thread) your patchsets to some other threads (unrelated
or older versions). This buries them deep in the mailbox and might
interfere with applying entire sets. See also:
https://elixir.bootlin.com/linux/v6.16-rc2/source/Documentation/process/submitting-patches.rst#L830

> ---
>  .../devicetree/bindings/serial/8250.yaml      | 20 +++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
> index bb7b9c87a807..3cbd0f532e15 100644
> --- a/Documentation/devicetree/bindings/serial/8250.yaml
> +++ b/Documentation/devicetree/bindings/serial/8250.yaml
> @@ -23,7 +23,9 @@ allOf:
>      then:
>        properties:
>          compatible:
> -          const: aspeed,ast2500-vuart
> +          anyOf:

This should be oneOf (by convention and actually more accurate meaning).

> +            - const: aspeed,ast2500-vuart
> +            - const: aspeed,ast2600-vuart
>    - if:
>        properties:
>          compatible:
> @@ -287,17 +289,19 @@ properties:
>    aspeed,sirq-polarity-sense:
>      $ref: /schemas/types.yaml#/definitions/phandle-array
>      description: |
> -      Phandle to aspeed,ast2500-scu compatible syscon alongside register
> -      offset and bit number to identify how the SIRQ polarity should be
> -      configured. One possible data source is the LPC/eSPI mode bit. Only
> -      applicable to aspeed,ast2500-vuart.
> +      Phandle to aspeed,ast2500-scu or aspeed,ast2600-scu compatible syscon
> +      alongside register offset and bit number to identify how the SIRQ
> +      polarity should be configured. One possible data source is the LPC/eSPI
> +      mode bit. Only applicable to aspeed,ast2500-vuart and
> +      aspeed,ast2600-vuart.
>      deprecated: true
>  
>    aspeed,lpc-io-reg:
>      $ref: /schemas/types.yaml#/definitions/uint32-array
>      maxItems: 1
>      description: |
> -      The VUART LPC address.  Only applicable to aspeed,ast2500-vuart.
> +      The VUART LPC address. Only applicable to aspeed,ast2500-vuart and
> +      aspeed,ast2600-vuart.
>  
>    aspeed,lpc-interrupts:
>      $ref: /schemas/types.yaml#/definitions/uint32-array
> @@ -305,8 +309,8 @@ properties:
>      maxItems: 2
>      description: |
>        A 2-cell property describing the VUART SIRQ number and SIRQ
> -      polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH).  Only
> -      applicable to aspeed,ast2500-vuart.
> +      polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only
> +      applicable to aspeed,ast2500-vuart and aspeed,ast2600-vuart.
>  

More important, where is documenting of the actual compatible?


Best regards,
Krzysztof