Re: [PATCH v5 3/3] media: i2c: imx471: Add Sony IMX471 image sensor driver

[Sakari Ailus]

Hi Kate,

Thanks for the update.

On Wed, Jun 24, 2026 at 11:35:08AM +0800, Kate Hsuan wrote:
...

> +static int imx471_set_pad_format(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_state *sd_state,
> +				 struct v4l2_subdev_format *fmt)
> +{
> +	struct imx471 *sensor = to_imx471(sd);
> +	const struct imx471_mode *mode;
> +	int h_blank, ret;
> +
> +	mode = v4l2_find_nearest_size(imx471_modes, ARRAY_SIZE(imx471_modes),
> +				      width, height, fmt->format.width,
> +				      fmt->format.height);
> +
> +	imx471_update_pad_format(sensor, mode, fmt);
> +
> +	*v4l2_subdev_state_get_format(sd_state, fmt->pad) = fmt->format;
> +
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> +		return 0;
> +
> +	if (media_entity_is_streaming(&sensor->sd.entity))
> +		return -EBUSY;
> +
> +	ret = __v4l2_ctrl_modify_range(sensor->vblank,
> +				       mode->fll_min - mode->height,
> +				       IMX471_FLL_MAX - mode->height,
> +				       1,
> +				       mode->fll_def - mode->height);
> +	if (ret)
> +		return ret;
> +
> +	h_blank = mode->llp - mode->width;
> +	/*
> +	 * Currently hblank is not changeable.
> +	 * So FPS control is done only by vblank.
> +	 */
> +	return __v4l2_ctrl_modify_range(sensor->hblank, h_blank,
> +					h_blank, 1, h_blank);
> +}

...

> +
> +static int imx471_init_state(struct v4l2_subdev *sd,
> +			     struct v4l2_subdev_state *sd_state)
> +{
> +	struct v4l2_subdev_format fmt = {
> +		.which = V4L2_SUBDEV_FORMAT_ACTIVE,

The purpose of the init_state op is to initialise the provided state only,
it's not allowed to change the sensor configuration.

> +		.format = {
> +			.code = MEDIA_BUS_FMT_SRGGB10_1X10,
> +			.width = imx471_modes[0].width,
> +			.height = imx471_modes[0].height,
> +		},
> +	};
> +
> +	return imx471_set_pad_format(sd, sd_state, &fmt);
> +}

-- 
Kind regards,

Sakari Ailus