Re: [PATCH v6 1/2] dt-bindings: bridge: Add Lontium LT9611C(EX/UXD) MIPI DSI to HDMI driver
From: Krzysztof Kozlowski
Date: Wed Jun 24 2026 - 10:07:32 EST
On 11/05/2026 05:28, Sunyun Yang wrote:
> <syyang@xxxxxxxxxxx> 于2026年5月8日周五 22:25写道:
>>
>> From: Sunyun Yang <syyang@xxxxxxxxxxx>
>>
>> LT9611C(EX/UXD) is an I2C-controlled chip that Receiver signal/dual port
>> mipi dsi and output hdmi, differences in hardware features:
>> - LT9611C: supports 1-port mipi dsi to hdmi 1.4
>> - LT9611EX: supports 2-port mipi dsi to hdmi 1.4
>> - LT9611UXD: supports 2-port mipi dsi to hdmi 1.4/2.0
>>
>> Signed-off-by: Sunyun Yang <syyang@xxxxxxxxxxx>
>> ---
>> .../bindings/display/bridge/lontium,lt9611.yaml | 8 ++++++--
>> 1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
>> index 429a06057ae8..e0821a63d9d7 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
>> +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
>> @@ -4,19 +4,23 @@
>> $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
>> $schema: http://devicetree.org/meta-schemas/core.yaml#
>>
>> -title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
>> +title: Lontium LT9611(UXC/C/EX/UXD) 2 Port MIPI DSI to HDMI Bridge
>>
>> maintainers:
>> - Vinod Koul <vkoul@xxxxxxxxxx>
>>
>> description: |
>> - The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
>> + The LT9611、LT9611UXC、LT9611C、LT9611EX and LT9611UXD
>> + are bridge devices which convert DSI to HDMI
>>
>> properties:
>> compatible:
>> enum:
>> - lontium,lt9611
>> + - lontium,lt9611c
>> + - lontium,lt9611ex
>> - lontium,lt9611uxc
>> + - lontium,lt9611uxd
>>
>> reg:
>> maxItems: 1
>> --
>
> Gentle ping.
> Thanks.
Except mess with threading, your patchset does not build, when applied
on next-20260618.
What is the base of this?
Best regards,
Krzysztof