Re: [PATCH] arm64: dts: qcom: eliza: Add PCIe PHY and controller nodes
From: Abel Vesa
Date: Thu Jun 25 2026 - 06:13:04 EST
On 26-06-10 17:40:09, Krishna Chaitanya Chundru wrote:
> Eliza supports two PCIe instances: one 8GT/s x1 (PCIe0) and one 8GT/s x2
> (PCIe1). Add PCIe controller and PHY nodes for both instances, and update
> the GCC clock references to use the newly added PHY nodes instead of
> placeholder zeros.
>
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---
> This patch depends on https://lore.kernel.org/all/20260608-eliza-v3-0-9bdeb7434b28@xxxxxxxxxxxxxxxx/
> ---
> arch/arm64/boot/dts/qcom/eliza.dtsi | 359 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 357 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
> index 7e97361a5dc5..2a51da62270d 100644
> --- a/arch/arm64/boot/dts/qcom/eliza.dtsi
> +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
> @@ -610,8 +610,8 @@ gcc: clock-controller@100000 {
>
> clocks = <&bi_tcxo_div2>,
> <&sleep_clk>,
> - <0>,
> - <0>,
> + <&pcie0_phy>,
> + <&pcie1_phy>,
> <&ufs_mem_phy 0>,
> <&ufs_mem_phy 1>,
> <&ufs_mem_phy 2>,
> @@ -716,6 +716,361 @@ mmss_noc: interconnect@1780000 {
> #interconnect-cells = <2>;
> };
>
> + pcie0: pcie@1c00000 {
> + device_type = "pci";
> + compatible = "qcom,eliza-pcie", "qcom,pcie-sm8550";
> + reg = <0 0x01c00000 0 0x3000>,
> + <0 0x40000000 0 0xf1d>,
> + <0 0x40000f20 0 0xa8>,
> + <0 0x40001000 0 0x1000>,
> + <0 0x40100000 0 0x100000>,
> + <0 0x01c03000 0 0x1000>;
> + reg-names = "parf",
> + "dbi",
> + "elbi",
> + "atu",
> + "config",
> + "mhi";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
> + <0x02000000 0 0x40300000 0 0x40300000 0 0x3d00000>;
> +
> + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi0",
> + "msi1",
> + "msi2",
> + "msi3",
> + "msi4",
> + "msi5",
> + "msi6",
> + "msi7",
> + "global";
> +
> + clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> + <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> + <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
> + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
> + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
> + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
> + clock-names = "aux",
> + "cfg",
> + "bus_master",
> + "bus_slave",
> + "slave_q2a",
> + "ddrss_sf_tbu",
> + "noc_aggr",
> + "cnoc_sf_axi";
> +
> + resets = <&gcc GCC_PCIE_0_BCR>,
> + <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
> + reset-names = "pci",
> + "link_down";
> +
> + interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
> + interconnect-names = "pcie-mem",
> + "cpu-pcie";
> +
> + power-domains = <&gcc GCC_PCIE_0_GDSC>;
> +
> + operating-points-v2 = <&pcie0_opp_table>;
> +
> + iommu-map = <0 &apps_smmu 0x1480 0x1>,
> + <0x100 &apps_smmu 0x1481 0x1>;
> +
> + interrupt-map = <0 0 0 1 &intc 0 0 0 564 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 2 &intc 0 0 0 565 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 3 &intc 0 0 0 566 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 4 &intc 0 0 0 567 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + #interrupt-cells = <1>;
> +
> + linux,pci-domain = <0>;
> + num-lanes = <1>;
> + bus-range = <0 0xff>;
> +
> + dma-coherent;
> +
No pinctrl states?
> +
> + pcie1: pcie@1c08000 {
> + device_type = "pci";
> + compatible = "qcom,eliza-pcie", "qcom,pcie-sm8550";
> + reg = <0 0x01c08000 0 0x3000>,
> + <0 0x44000000 0 0xf1d>,
> + <0 0x44000f20 0 0xa8>,
> + <0 0x44001000 0 0x1000>,
> + <0 0x44100000 0 0x100000>,
> + <0 0x01c0b000 0 0x1000>;
> + reg-names = "parf",
> + "dbi",
> + "elbi",
> + "atu",
> + "config",
> + "mhi";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges = <0x01000000 0 0x00000000 0 0x44200000 0 0x100000>,
> + <0x02000000 0 0x44300000 0 0x44300000 0 0x3d00000>;
> +
> + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi0",
> + "msi1",
> + "msi2",
> + "msi3",
> + "msi4",
> + "msi5",
> + "msi6",
> + "msi7",
> + "global";
> +
> + clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
> + <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
> + <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
> + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
> + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
> + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
> + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
> + clock-names = "aux",
> + "cfg",
> + "bus_master",
> + "bus_slave",
> + "slave_q2a",
> + "ddrss_sf_tbu",
> + "noc_aggr",
> + "cnoc_sf_axi";
> +
> + resets = <&gcc GCC_PCIE_1_BCR>,
> + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
> + reset-names = "pci",
> + "link_down";
> +
> + interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
> + interconnect-names = "pcie-mem",
> + "cpu-pcie";
> +
> + power-domains = <&gcc GCC_PCIE_1_GDSC>;
> +
> + operating-points-v2 = <&pcie1_opp_table>;
> +
> + iommu-map = <0 &apps_smmu 0x1400 0x1>,
> + <0x100 &apps_smmu 0x1401 0x1>;
> +
> + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + #interrupt-cells = <1>;
> +
> + linux,pci-domain = <1>;
> + num-lanes = <2>;
> + bus-range = <0 0xff>;
> +
> + dma-coherent;
No pinctrl states?