[PATCH] dmaengine: qcom: gpi: correct channel name in error path

[Brian Masney]

When attempting to start the Fedora graphical installer from a USB
thumbdrive on the Lenovo Thinkpad x13s laptop, the following errors are
shown in dmesg multiple times:

    kernel: gpi 800000.dma-controller: cmd: CH START completion timeout:0
    kernel: gpi 800000.dma-controller: Error with cmd:CH START ret:-5
    kernel: gpi 800000.dma-controller: Error start chan:-5

Looking through the error path, gpi_send_cmd() sends the wrong gchan to
gpi_send_cmd() in gpi_ch_init()'s error path. Let's fix this by passing
the correct gchan.

Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx>
Assisted-by: Claude:claude-opus-4-6
---
There's a separate issue with the graphical Fedora installer not
working that I haven't had time to dig into further. I can work
around it by using the text installer.
---
 drivers/dma/qcom/gpi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index a5055a6273af..3f390b5821ab 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -1965,12 +1965,12 @@ static int gpi_ch_init(struct gchan *gchan)
 error_start_chan:
 	for (i = i - 1; i >= 0; i--) {
 		gpi_stop_chan(&gpii->gchan[i]);
-		gpi_send_cmd(gpii, gchan, GPI_CH_CMD_RESET);
+		gpi_send_cmd(gpii, &gpii->gchan[i], GPI_CH_CMD_RESET);
 	}
 	i = 2;
 error_alloc_chan:
 	for (i = i - 1; i >= 0; i--)
-		gpi_reset_chan(gchan, GPI_CH_CMD_DE_ALLOC);
+		gpi_reset_chan(&gpii->gchan[i], GPI_CH_CMD_DE_ALLOC);
 error_alloc_ev_ring:
 	gpi_disable_interrupts(gpii);
 error_config_int:

---
base-commit: 6c94b38b83a04c43ea49004275f0391404051093
change-id: 20260625-qcom-gpi-err-fix-06ef18453608

Best regards,
-- 
Brian Masney <bmasney@xxxxxxxxxx>