[PATCH 3/4] dt-bindings: PCI: mediatek-gen3: Split Airoha schema and document 2-lanes
From: Christian Marangi
Date: Thu Jun 25 2026 - 17:58:46 EST
To permit proper documentation of required property to support PCIe
configured for 2-lanes mode, split the Airoha schema part from the
mediatek-gen3 schema to a dedicated schema.
A PCIe configured for 2-lanes mode require an additional reg for the
secondary PCIe to be configured and the airoha,scu phandle to correctly
configure the PCIe MUX.
Rework the mediatek-gen3 schema to drop any redundant constraint previsouly
introduced for Airoha PCIe properties.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
.../bindings/pci/airoha,en7581-pcie.yaml | 251 ++++++++++++++++++
.../bindings/pci/mediatek-pcie-gen3.yaml | 77 +-----
2 files changed, 256 insertions(+), 72 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/airoha,en7581-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/airoha,en7581-pcie.yaml b/Documentation/devicetree/bindings/pci/airoha,en7581-pcie.yaml
new file mode 100644
index 000000000000..977c1816572c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/airoha,en7581-pcie.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/airoha,en7581-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gen3 PCIe controller on Airoha SoCs
+
+maintainers:
+ - Christian Marangi <ansuelsmth@xxxxxxxxx>
+
+description: |+
+ PCIe Gen3 MAC controller for Airoha SoCs, it supports Gen3 speed
+ and compatible with Gen2, Gen1 speed.
+
+ This PCIe controller supports up to 256 MSI vectors, the MSI hardware
+ block diagram is as follows:
+
+ +-----+
+ | GIC |
+ +-----+
+ ^
+ |
+ port->irq
+ |
+ +-+-+-+-+-+-+-+-+
+ |0|1|2|3|4|5|6|7| (PCIe intc)
+ +-+-+-+-+-+-+-+-+
+ ^ ^ ^
+ | | ... |
+ +-------+ +------+ +-----------+
+ | | |
+ +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
+ |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets)
+ +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
+ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
+ | | | | | | | | | | | | (MSI vectors)
+ | | | | | | | | | | | |
+
+ (MSI SET0) (MSI SET1) ... (MSI SET7)
+
+ With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
+ each set has its own address for MSI message, and supports 32 MSI vectors
+ to generate interrupt.
+
+properties:
+ compatible:
+ const: airoha,en7581-pcie
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ reg-names:
+ minItems: 1
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ ranges:
+ minItems: 1
+ maxItems: 8
+
+ iommu-map:
+ maxItems: 1
+
+ iommu-map-mask:
+ const: 0
+
+ resets:
+ minItems: 1
+ maxItems: 4
+
+ reset-names:
+ minItems: 1
+ maxItems: 4
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: sys-ck
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: pcie-phy
+
+ num-lanes:
+ enum: [1, 2]
+
+ mediatek,pbus-csr:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to pbus-csr syscon
+ - description: offset of pbus-csr base address register
+ - description: offset of pbus-csr base address mask register
+ description:
+ Phandle with two arguments to the syscon node used to detect if
+ a given address is accessible on PCIe controller.
+
+ airoha,scu:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to airoha SCU syscon
+ description:
+ Phandle to SCU syscon to configure PCIe MUX for 2 lines support.
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ properties:
+ '#address-cells':
+ const: 0
+ '#interrupt-cells':
+ const: 1
+ interrupt-controller: true
+
+ required:
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - ranges
+ - clocks
+ - clock-names
+ - '#interrupt-cells'
+ - interrupt-controller
+
+allOf:
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+ - if:
+ properties:
+ num-lanes:
+ const: 2
+ then:
+ properties:
+ regs:
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: pcie-mac
+ - const: sec-pcie-mac
+
+ resets:
+ minItems: 4
+
+ reset-names:
+ items:
+ - const: phy-lane0
+ - const: phy-lane1
+ - const: perstout
+ - const: sec-perstout
+
+ required:
+ - airoha,scu
+
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: pcie-mac
+
+ resets:
+ minItems: 2
+ maxItems: 3
+
+ reset-names:
+ minItems: 2
+ items:
+ - enum: [ phy-lane0, phy-lane1, phy-lan2 ]
+ - enum: [ phy-lane1, perstout ]
+ - const: phy-lane2
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1fc00000 {
+ compatible = "airoha,en7581-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ reg = <0x0 0x1fc00000 0x0 0x1670>,
+ <0x0 0x1fc20000 0x0 0x1670>;
+ reg-names = "pcie-mac", "sec-pcie-mac";
+
+ clocks = <&scuclk 7>;
+ clock-names = "sys-ck";
+
+ phys = <&pciephy>;
+ phy-names = "pcie-phy";
+
+ ranges = <0x02000000 0 0x20000000 0x0 0x20000000 0 0x4000000>;
+
+ resets = <&scuclk 48>,
+ <&scuclk 49>,
+ <&scuclk 53>,
+ <&scuclk 54>;
+ reset-names = "phy-lane0", "phy-lane1",
+ "perstout", "sec-perstout";
+
+ num-lanes = <2>;
+
+ mediatek,pbus-csr = <&pbus_csr 0x0 0x4>;
+
+ airoha,scu = <&scuclk>;
+
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 4db700fc36ba..510f1f2b1c5a 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -59,7 +59,6 @@ properties:
- const: mediatek,mt8196-pcie
- const: mediatek,mt8192-pcie
- const: mediatek,mt8196-pcie
- - const: airoha,en7581-pcie
reg:
maxItems: 1
@@ -83,20 +82,20 @@ properties:
resets:
minItems: 1
- maxItems: 3
+ maxItems: 2
reset-names:
minItems: 1
- maxItems: 3
+ maxItems: 2
items:
- enum: [ phy, mac, phy-lane0, phy-lane1, phy-lane2 ]
+ enum: [ phy, mac ]
clocks:
- minItems: 1
+ minItems: 4
maxItems: 6
clock-names:
- minItems: 1
+ minItems: 4
maxItems: 6
assigned-clocks:
@@ -115,17 +114,6 @@ properties:
power-domains:
maxItems: 1
- mediatek,pbus-csr:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- items:
- - items:
- - description: phandle to pbus-csr syscon
- - description: offset of pbus-csr base address register
- - description: offset of pbus-csr base address mask register
- description:
- Phandle with two arguments to the syscon node used to detect if
- a given address is accessible on PCIe controller.
-
'#interrupt-cells':
const: 1
@@ -177,16 +165,6 @@ allOf:
- const: peri_26m
- const: top_133m
- resets:
- minItems: 1
- maxItems: 2
-
- reset-names:
- minItems: 1
- maxItems: 2
-
- mediatek,pbus-csr: false
-
- if:
properties:
compatible:
@@ -208,16 +186,6 @@ allOf:
- const: peri_26m
- const: peri_mem
- resets:
- minItems: 1
- maxItems: 2
-
- reset-names:
- minItems: 1
- maxItems: 2
-
- mediatek,pbus-csr: false
-
- if:
properties:
compatible:
@@ -246,8 +214,6 @@ allOf:
- const: phy
- const: mac
- mediatek,pbus-csr: false
-
- if:
properties:
compatible:
@@ -257,7 +223,6 @@ allOf:
then:
properties:
clocks:
- minItems: 4
maxItems: 4
clock-names:
@@ -267,38 +232,6 @@ allOf:
- const: peri_26m
- const: top_133m
- resets:
- minItems: 1
- maxItems: 2
-
- reset-names:
- minItems: 1
- maxItems: 2
-
- mediatek,pbus-csr: false
-
- - if:
- properties:
- compatible:
- const: airoha,en7581-pcie
- then:
- properties:
- clocks:
- maxItems: 1
-
- clock-names:
- items:
- - const: sys-ck
-
- resets:
- minItems: 3
-
- reset-names:
- items:
- - const: phy-lane0
- - const: phy-lane1
- - const: phy-lane2
-
unevaluatedProperties: false
examples:
--
2.53.0