[PATCH] USB: usb-storage: ene_ub6250: restore media-ready check

[raoxu]

From: Xu Rao <raoxu@xxxxxxxxxxxxx>

Commit 1892bf90677a ("USB: usb-storage: Fix use of bitfields for
hardware data in ene_ub6250.c") converted the media status fields from
bitfields to bit masks.

The original ene_transport() test called ene_init() only when neither
media type was ready:

        !(sd_ready || ms_ready)

The converted test became:

        !sd_ready || ms_ready

This is not equivalent. Restore the original semantics by testing that
both ready bits are clear before calling ene_init().

Fixes: 1892bf90677a ("USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Xu Rao <raoxu@xxxxxxxxxxxxx>
---
 drivers/usb/storage/ene_ub6250.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 8770de01a384..ed49a3bc859c 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -2305,7 +2305,8 @@ static int ene_transport(struct scsi_cmnd *srb, struct us_data *us)

 	/*US_DEBUG(usb_stor_show_command(us, srb)); */
 	scsi_set_resid(srb, 0);
-	if (unlikely(!(info->SD_Status & SD_Ready) || (info->MS_Status & MS_Ready)))
+	if (unlikely(!(info->SD_Status & SD_Ready) &&
+		     !(info->MS_Status & MS_Ready)))
 		result = ene_init(us);
 	if (result == USB_STOR_XFER_GOOD) {
 		result = USB_STOR_TRANSPORT_ERROR;
--
2.50.1