[PATCH v2 5/9] arm64: dts: agilex5: add SOCDK eMMC daughter board support

[Tanmay Kathpalia]

Add socfpga_agilex5_socdk_emmc.dts for the Agilex5 SoCDK eMMC daughter
board variant. Define board-specific regulators at the DTS root: a
fixed 3.3V supply for card power and a fixed 1.8V supply for eMMC I/O
voltage.

Enable the shared SD/eMMC controller for eMMC-only operation with an
8-bit bus, HS200 and HS400 modes at 1.8V signaling, and a 200 MHz
maximum clock frequency.

Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@xxxxxxxxxx>
---
 arch/arm64/boot/dts/intel/Makefile            |   1 +
 .../dts/intel/socfpga_agilex5_socdk_emmc.dts  | 120 ++++++++++++++++++
 2 files changed, 121 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts

diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 33fcc55d0cb9..5bbbcfda1f48 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -8,5 +8,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex5_socdk_013b.dtb \
 				socfpga_agilex5_socdk_modular.dtb \
 				socfpga_agilex5_socdk_nand.dtb \
+				socfpga_agilex5_socdk_emmc.dtb \
 				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts
new file mode 100644
index 000000000000..455808db32bb
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK eMMC daughter board";
+	compatible = "intel,socfpga-agilex5-socdk-emmc", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "hps_led0";
+			gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "hps_led1";
+			gpios = <&porta 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	vmmc_reg: regulator-fixed-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-emmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vqmmc_io_reg: regulator-fixed-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "vqmmc-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac0_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		emac0_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i3c0 {
+	status = "okay";
+};
+
+&i3c1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	no-sd;
+	no-sdio;
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	vmmc-supply = <&vmmc_reg>;
+	vqmmc-supply = <&vqmmc_io_reg>;
+	max-frequency = <200000000>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
-- 
2.43.7