[PATCH v5 00/12] New features for the AD5686 IIO driver

[Rodrigo Alencar via B4 Relay]

This is the second series of three on updating the AD5686 driver.

Initially, a big patch series was sent:
https://lore.kernel.org/r/20260422-ad5313r-iio-support-v1-0-ed7dca001d1b@xxxxxxxxxx

Then, the first patch series added fixes and cleanups:
https://lore.kernel.org/linux-iio/20260524-ad5686-fixes-v7-0-b6bf395d08bd@xxxxxxxxxx/

This one is introducing new features:
- Consume optional reset and correct power supplies;
- LDAC GPIO handling (active-low, held low when unused);
- SPI bus sync() implementation for batching multiple transfers;
- Triggered buffer support, leveraging LDAC and sync() to flush
  all channel writes atomically;
- Gain control support through the scale property.

Signed-off-by: Rodrigo Alencar <rodrigo.alencar@xxxxxxxxxx>
---
Changes in v5:
- Create auxiliary handler for the triggered buffer.
- Do not allow modification of double_scale in case gain_gpio is not set.
- Link to v4: https://lore.kernel.org/r/20260623-ad5686-new-features-v4-0-28962a57db0f@xxxxxxxxxx

Changes in v4:
- Replace anyof+const for enum in dt-bindings. 
- Address some sashiko's comments.
- Use guard(mutex)() in trigger handler and other misc changes.
- Link to v3: https://lore.kernel.org/r/20260616-ad5686-new-features-v3-0-f829fb7e9262@xxxxxxxxxx

Changes in v3:
- Add range-double property.
- Acquire reset control after power-up delay.
- Include cleanup.h and use guard(mutex)() in read_raw().
- Link to v2: https://lore.kernel.org/r/20260609-ad5686-new-features-v2-0-70b423f5c76d@xxxxxxxxxx

Changes in v2:
- Get reset control deasserted.
- Update entire spi_transfer struct rather than individual fields.
- Replace udelay() for fsleep() in probe().
- Minor changes addressing further feedback.
- Link to v1: https://lore.kernel.org/r/20260602-ad5686-new-features-v1-0-691e01883d27@xxxxxxxxxx

---
Rodrigo Alencar (12):
      dt-bindings: iio: dac: ad5696: add reset/ldac/gain support
      dt-bindings: iio: dac: ad5696: rework on power supplies
      dt-bindings: iio: dac: ad5686: add reset/ldac/gain support
      dt-bindings: iio: dac: ad5686: rework on power supplies
      iio: dac: ad5686: add support for missing power supplies
      iio: dac: ad5686: consume optional reset signal
      iio: dac: ad5686: add ldac gpio
      iio: dac: ad5686: introduce sync operation
      iio: dac: ad5686: implement new sync() op for the spi bus
      iio: dac: ad5686: read_raw/write_raw: use guard(mutex)()
      iio: dac: ad5686: add triggered buffer support
      iio: dac: ad5686: add gain control support

 .../devicetree/bindings/iio/dac/adi,ad5686.yaml    |  72 +++++-
 .../devicetree/bindings/iio/dac/adi,ad5696.yaml    |  73 +++++-
 drivers/iio/dac/Kconfig                            |   2 +
 drivers/iio/dac/ad5686-spi.c                       | 125 ++++++++---
 drivers/iio/dac/ad5686.c                           | 249 +++++++++++++++++++--
 drivers/iio/dac/ad5686.h                           |  34 ++-
 drivers/iio/dac/ad5696-i2c.c                       |   2 +-
 7 files changed, 496 insertions(+), 61 deletions(-)
---
base-commit: 7667a80340e99fd45357d0c90ae05813b01bbfef
change-id: 20260602-ad5686-new-features-e116c04bddb9

Best regards,
-- 
Rodrigo Alencar <rodrigo.alencar@xxxxxxxxxx>