[PATCH RFC v5 02/12] dt-bindings: soc: zte: Add zx297520v3 matrix clock and reset bindings

From: Stefan Dösinger

Date: Sun Jun 28 2026 - 15:59:45 EST

This controller contains clocks and resets for high speed devices on the
zx297520v3 board and hardware spinlocks that I expect will be necessary
to communicate correctly with the LTE DSP firmware blob.

A simple MFD driver will instantiate independent clock, reset and hwlock
drivers.

Signed-off-by: Stefan Dösinger <stefandoesinger@xxxxxxxxx>

---

Changes
v4->v5:
Move binding to soc/zte
Remove topclk from the example
Add #hwlock-cells for hw spinlock registers
Add more clocks I stumbled into: sram0 and another LTE related device

v3->v4:
Split matrixclk into its own controller again because syscon/regmap
deals poorly with device nodes that have more than one memory region. As
a consequence I am passing all PLL outputs generated on Topclk down to
Matrixclk.
---
.../bindings/soc/zte/zte,zx297520v3-matrixcrm.yaml | 177 +++++++++++++++++++++
include/dt-bindings/clock/zte,zx297520v3-clk.h | 37 +++++
include/dt-bindings/reset/zte,zx297520v3-reset.h | 10 ++
3 files changed, 224 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/zte/zte,zx297520v3-matrixcrm.yaml b/Documentation/devicetree/bindings/soc/zte/zte,zx297520v3-matrixcrm.yaml
new file mode 100644
index 000000000000..bbec0eb837da
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/zte/zte,zx297520v3-matrixcrm.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/zte/zte,zx297520v3-matrixcrm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZTE zx297520v3 SoC matrix clock and reset controller
+
+maintainers:
+ - Stefan Dösinger <stefandoesinger@xxxxxxxxx>
+
+description: |
+ This controller contains clock and reset controls for high speed devices on
+ the zx297520v3 board: The CPU, RAM, SDIO and Ethernet clocks and resets are
+ found here. This controller requires PLL-generated clocks from Topcrm as well
+ as the fixed 26 MHz and 32 KHz oscillators found on this board.
+
+ This controller also contains hardware mutex registers for synchronization
+ with different processors on this board.
+
+ All available clocks are defined as preprocessor macros in the
+ 'dt-bindings/clock/zte,zx297520v3-clk.h' header. Resets are defined in the
+ 'dt-bindings/reset/zte,zx297520v3-reset.h' header.
+
+properties:
+ compatible:
+ items:
+ - const: zte,zx297520v3-matrixcrm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: 26 MHz external oscillator
+ - description: 32 KHz external oscillator
+ - description: Main PLL output from topcrm (usually 624 MHz)
+ - description: Main PLL subdivision factor 2
+ - description: Main PLL subdivision factor 3
+ - description: Main PLL subdivision factor 4
+ - description: Main PLL subdivision factor 5
+ - description: Main PLL subdivision factor 6
+ - description: Main PLL subdivision factor 8
+ - description: Main PLL subdivision factor 12
+ - description: Main PLL subdivision factor 16
+ - description: Main PLL subdivision factor 26
+ - description: Upll output from topcrm (Usually 480 MHz)
+ - description: Upll subdivision factor 2
+ - description: Upll subdivision factor 3
+ - description: Upll subdivision factor 4
+ - description: Upll subdivision factor 5
+ - description: Upll subdivision factor 6
+ - description: Upll subdivision factor 8
+ - description: Upll subdivision factor 12
+ - description: Upll subdivision factor 16
+ - description: Dpll output from topcrm (usually 492.88 MHz)
+ - description: Dpll subdivision factor 2
+ - description: Dpll subdivision factor 3
+ - description: Dpll subdivision factor 4
+ - description: Dpll subdivision factor 5
+ - description: Dpll subdivision factor 6
+ - description: Dpll subdivision factor 8
+ - description: Dpll subdivision factor 12
+ - description: Dpll subdivision factor 16
+ - description: Gpll output from topcrm (usually 200 MHz)
+ - description: Gpll subdivision factor 2
+ - description: Gpll subdivision factor 3
+ - description: Gpll subdivision factor 4
+ - description: Gpll subdivision factor 5
+ - description: Gpll subdivision factor 6
+ - description: Gpll subdivision factor 8
+ - description: Gpll subdivision factor 12
+ - description: Gpll subdivision factor 16
+
+ clock-names:
+ items:
+ - const: osc26m
+ - const: osc32k
+ - const: mpll
+ - const: mpll_d2
+ - const: mpll_d3
+ - const: mpll_d4
+ - const: mpll_d5
+ - const: mpll_d6
+ - const: mpll_d8
+ - const: mpll_d12
+ - const: mpll_d16
+ - const: mpll_d26
+ - const: upll
+ - const: upll_d2
+ - const: upll_d3
+ - const: upll_d4
+ - const: upll_d5
+ - const: upll_d6
+ - const: upll_d8
+ - const: upll_d12
+ - const: upll_d16
+ - const: dpll
+ - const: dpll_d2
+ - const: dpll_d3
+ - const: dpll_d4
+ - const: dpll_d5
+ - const: dpll_d6
+ - const: dpll_d8
+ - const: dpll_d12
+ - const: dpll_d16
+ - const: gpll
+ - const: gpll_d2
+ - const: gpll_d3
+ - const: gpll_d4
+ - const: gpll_d5
+ - const: gpll_d6
+ - const: gpll_d8
+ - const: gpll_d12
+ - const: gpll_d16
+
+ "#clock-cells":
+ const: 1
+
+ "#hwlock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - "#hwlock-cells"
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/zte,zx297520v3-clk.h>
+ #include <dt-bindings/reset/zte,zx297520v3-reset.h>
+
+ clock-controller@1306000 {
+ compatible = "zte,zx297520v3-matrixcrm";
+ reg = <0x01306000 0x400>;
+ clocks = <&osc26m>, <&osc32k>,
+ <&topcrm ZX297520V3_MPLL>, <&topcrm ZX297520V3_MPLL_D2>,
+ <&topcrm ZX297520V3_MPLL_D3>, <&topcrm ZX297520V3_MPLL_D4>,
+ <&topcrm ZX297520V3_MPLL_D5>, <&topcrm ZX297520V3_MPLL_D6>,
+ <&topcrm ZX297520V3_MPLL_D8>, <&topcrm ZX297520V3_MPLL_D12>,
+ <&topcrm ZX297520V3_MPLL_D16>, <&topcrm ZX297520V3_MPLL_D26>,
+ <&topcrm ZX297520V3_UPLL>, <&topcrm ZX297520V3_UPLL_D2>,
+ <&topcrm ZX297520V3_UPLL_D3>, <&topcrm ZX297520V3_UPLL_D4>,
+ <&topcrm ZX297520V3_UPLL_D5>, <&topcrm ZX297520V3_UPLL_D6>,
+ <&topcrm ZX297520V3_UPLL_D8>, <&topcrm ZX297520V3_UPLL_D12>,
+ <&topcrm ZX297520V3_UPLL_D16>,
+ <&topcrm ZX297520V3_DPLL>, <&topcrm ZX297520V3_DPLL_D2>,
+ <&topcrm ZX297520V3_DPLL_D3>, <&topcrm ZX297520V3_DPLL_D4>,
+ <&topcrm ZX297520V3_DPLL_D5>, <&topcrm ZX297520V3_DPLL_D6>,
+ <&topcrm ZX297520V3_DPLL_D8>, <&topcrm ZX297520V3_DPLL_D12>,
+ <&topcrm ZX297520V3_DPLL_D16>,
+ <&topcrm ZX297520V3_GPLL>, <&topcrm ZX297520V3_GPLL_D2>,
+ <&topcrm ZX297520V3_GPLL_D3>, <&topcrm ZX297520V3_GPLL_D4>,
+ <&topcrm ZX297520V3_GPLL_D5>, <&topcrm ZX297520V3_GPLL_D6>,
+ <&topcrm ZX297520V3_GPLL_D8>, <&topcrm ZX297520V3_GPLL_D12>,
+ <&topcrm ZX297520V3_GPLL_D16>;
+ clock-names = "osc26m", "osc32k", "mpll", "mpll_d2", "mpll_d3",
+ "mpll_d4", "mpll_d5", "mpll_d6", "mpll_d8", "mpll_d12",
+ "mpll_d16", "mpll_d26", "upll", "upll_d2", "upll_d3",
+ "upll_d4", "upll_d5", "upll_d6", "upll_d8", "upll_d12",
+ "upll_d16", "dpll", "dpll_d2", "dpll_d3", "dpll_d4",
+ "dpll_d5", "dpll_d6", "dpll_d8", "dpll_d12", "dpll_d16",
+ "gpll", "gpll_d2", "gpll_d3", "gpll_d4", "gpll_d5",
+ "gpll_d6", "gpll_d8", "gpll_d12", "gpll_d16";
+ #clock-cells = <1>;
+ #hwlock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/include/dt-bindings/clock/zte,zx297520v3-clk.h b/include/dt-bindings/clock/zte,zx297520v3-clk.h
index de1c08b6a5a9..8a6aa456a708 100644
--- a/include/dt-bindings/clock/zte,zx297520v3-clk.h
+++ b/include/dt-bindings/clock/zte,zx297520v3-clk.h
@@ -94,4 +94,41 @@
#define ZX297520V3_HSIC_WCLK 86
#define ZX297520V3_HSIC_PCLK 87

+#define ZX297520V3_CPU_WCLK 1
+#define ZX297520V3_CPU_PCLK 2
+#define ZX297520V3_ZSP_WCLK 3
+#define ZX297520V3_EDCP_WCLK 4
+#define ZX297520V3_EDCP_PCLK 5
+#define ZX297520V3_SD0_WCLK 6
+#define ZX297520V3_SD0_PCLK 7
+#define ZX297520V3_SD0_CDET 8
+#define ZX297520V3_SD1_WCLK 9
+#define ZX297520V3_SD1_PCLK 10
+#define ZX297520V3_SD1_CDET 11
+#define ZX297520V3_NAND_WCLK 12
+#define ZX297520V3_NAND_PCLK 13
+#define ZX297520V3_DMA_PCLK 14
+#define ZX297520V3_MBOX_PCLK 15
+#define ZX297520V3_PDCFG_WCLK 16
+#define ZX297520V3_PDCFG_PCLK 17
+#define ZX297520V3_SSC_WCLK 18
+#define ZX297520V3_SSC_PCLK 19
+#define ZX297520V3_GMAC_WCLK 20
+#define ZX297520V3_GMAC_PCLK 21
+#define ZX297520V3_GMAC_AHB 22
+#define ZX297520V3_VOU_WCLK 23
+#define ZX297520V3_VOU_PCLK 24
+#define ZX297520V3_LSP_MPLL_D5_WCLK 25
+#define ZX297520V3_LSP_MPLL_D4_WCLK 26
+#define ZX297520V3_LSP_MPLL_D6_WCLK 27
+#define ZX297520V3_LSP_MPLL_D8_WCLK 28
+#define ZX297520V3_LSP_MPLL_D12_WCLK 29
+#define ZX297520V3_LSP_OSC26M_WCLK 30
+#define ZX297520V3_LSP_OSC32K_WCLK 31
+#define ZX297520V3_LSP_PCLK 32
+#define ZX297520V3_LSP_TDM_WCLK 33
+#define ZX297520V3_LSP_DPLL_D4_WCLK 34
+#define ZX297520V3_SRAM0_PCLK 35
+#define ZX297520V3_GSM_CFG_PCLK 36
+
#endif /* __DT_BINDINGS_CLOCK_ZX297520V3_H */
diff --git a/include/dt-bindings/reset/zte,zx297520v3-reset.h b/include/dt-bindings/reset/zte,zx297520v3-reset.h
index 43db72bb59de..81ffc8bc34c5 100644
--- a/include/dt-bindings/reset/zte,zx297520v3-reset.h
+++ b/include/dt-bindings/reset/zte,zx297520v3-reset.h
@@ -29,4 +29,14 @@
#define ZX297520V3_HSIC_PHY_RESET 20
#define ZX297520V3_HSIC_RESET 21

+#define ZX297520V3_CPU_RESET 0
+#define ZX297520V3_EDCP_RESET 1
+#define ZX297520V3_SD0_RESET 2
+#define ZX297520V3_SD1_RESET 3
+#define ZX297520V3_NAND_RESET 4
+#define ZX297520V3_PDCFG_RESET 5
+#define ZX297520V3_SSC_RESET 6
+#define ZX297520V3_GMAC_RESET 7
+#define ZX297520V3_VOU_RESET 8
+
#endif /* __DT_BINDINGS_RESET_ZX297520V3_H */

--
2.53.0