[PATCH 1/4] ARM: dts: helios4: add vcc-supply to EEPROM

[Rosen Penev]

The at24 driver requests a 'vcc' supply for the EEPROM, producing
'supply vcc not found, using dummy regulator' at boot when the
property is missing.

The EEPROM sits on the Helios 4 and is powered by the
same always-on 3.3V rail used by other on-board I2C devices.
Add vcc-supply = <&reg_3p3v> to silence the warning.

Fixes: ced8025b569e ("ARM: dts: armada388-helios4")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@xxxxxxxxx>
---
 arch/arm/boot/dts/marvell/armada-388-helios4.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/marvell/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
index 390e98df49c9..05540b8012c2 100644
--- a/arch/arm/boot/dts/marvell/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
@@ -201,6 +201,10 @@ temp_sensor: temp@4c {
 					reg = <0x4c>;
 					vcc-supply = <&reg_3p3v>;
 				};
+
+				eeprom@53 {
+					vcc-supply = <&reg_3p3v>;
+				};
 			};
 
 			i2c@11100 {
-- 
2.54.0