Re: [PATCH v1 1/3] dt-bindings: i2c: Add Qualcomm I2C slave controller

[Krzysztof Kozlowski]

On 28/06/2026 16:39, Viken Dadhaniya wrote:
> +description:
> +  The Qualcomm I2C slave controller is a dedicated hardware IP found on
> +  Qualcomm SoCs that operates exclusively as an I2C slave device on the bus.
> +  It supports FIFO (PIO) mode for data transfer and does not function as an
> +  I2C master.
> +
> +properties:
> +  compatible:
> +    const: qcom,i2c-slave

Such compatible makes little sense in upstream. Please look at other
bindings how to properly create a compatible. This has to be device
specific.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: XO clock for I2C slave
> +      - description: AHB clock for I2C slave
> +
> +  clock-names:
> +    items:
> +      - const: sm_bus_xo_clk
> +      - const: sm_bus_ahb_clk

Look at other bindings.

> +
> +  qcom,slave-addr:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The 7-bit I2C slave address programmed into the controller's device
> +      address register. This controller operates exclusively as an I2C slave
> +      and has no child nodes, so the standard 'reg' property cannot be used
> +      to convey the I2C address (it is already used for the MMIO register
> +      range). The address is configurable at runtime via a hardware register.
> +    minimum: 0x08
> +    maximum: 0x77
> +
> +  interconnects:
> +    maxItems: 1
> +
> +  interconnect-names:
> +    const: i2c-slave-config

i2c

> +
> +  pinctrl-0: true
> +  pinctrl-1: true
> +
> +  pinctrl-names:
> +    minItems: 1
> +    items:
> +      - const: default
> +      - const: sleep
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - qcom,slave-addr
> +  - interconnects
> +  - interconnect-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
> +    #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
> +
> +    i2c-slave@88ca000 {

You need to fix your terminology everywhere...


Best regards,
Krzysztof