[PATCH v8 3/3] arm64: dts: qcom: monaco: enable inline crypto engine for SDHC

[Kuldeep Singh]

From: Neeraj Soni <neeraj.soni@xxxxxxxxxxxxxxxx>

Add the dedicated ICE node for monaco and reference it from the SDHC
controller via qcom,ice.

Keep the ICE node disabled by default in monaco.dtsi and enable it in
board DTS files where the corresponding SDHC node is enabled.

Signed-off-by: Neeraj Soni <neeraj.soni@xxxxxxxxxxxxxxxx>
Co-developed-by: Kuldeep Singh <kuldeep.singh@xxxxxxxxxxxxxxxx>
Signed-off-by: Kuldeep Singh <kuldeep.singh@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/monaco-evk.dts        |  4 ++++
 arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi |  4 ++++
 arch/arm64/boot/dts/qcom/monaco.dtsi           | 14 ++++++++++++++
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts      |  4 ++++
 4 files changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
index 9d17ef7d2caf..2c7d6ebc54fa 100644
--- a/arch/arm64/boot/dts/qcom/monaco-evk.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
@@ -705,6 +705,10 @@ &sdhc_1 {
 	status = "okay";
 };
 
+&sdhc_ice {
+	status = "okay";
+};
+
 &serdes0 {
 	phy-supply = <&vreg_l4a>;
 
diff --git a/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi b/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi
index 9b5ed55939b8..62c6f45025c1 100644
--- a/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco-monza-som.dtsi
@@ -282,6 +282,10 @@ &sdhc_1 {
 	status = "okay";
 };
 
+&sdhc_ice {
+	status = "okay";
+};
+
 /* Ethernet/SGMII */
 &serdes0 {
 	phy-supply = <&vreg_l5a>;
diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
index e4c8466f941b..71f4bb164ec3 100644
--- a/arch/arm64/boot/dts/qcom/monaco.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
@@ -4835,6 +4835,8 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			supports-cqe;
 			dma-coherent;
 
+			qcom,ice = <&sdhc_ice>;
+
 			mmc-ddr-1_8v;
 			mmc-hs200-1_8v;
 			mmc-hs400-1_8v;
@@ -4867,6 +4869,18 @@ opp-384000000 {
 			};
 		};
 
+		sdhc_ice: crypto@87c8000 {
+			compatible = "qcom,qcs8300-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x087c8000 0x0 0x18000>;
+			clocks = <&gcc GCC_SDCC1_ICE_CORE_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			status = "disabled";
+		};
+
 		usb_1_hsphy: phy@8904000 {
 			compatible = "qcom,qcs8300-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index e9a8553a8d82..58c4a328bd3d 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -726,6 +726,10 @@ &sdhc_1 {
 	status = "okay";
 };
 
+&sdhc_ice {
+	status = "okay";
+};
+
 &tlmm {
 	bt_en_state: bt-en-state {
 		pins = "gpio55";

-- 
2.34.1