[PATCH v4 3/5] arm64: dts: qcom: kaanapali: fix traceNoC probe issue

[Jie Gan]

The traceNoC node used the "qcom,coresight-tnoc", "arm,primecell"
compatible, which places the device on the AMBA bus. To bind an AMBA
device, the bus first reads the peripheral and component ID registers
(PID/CID) at the top of the device's register block and matches them
against the primecell ID. On this platform the traceNoC does not expose
a valid CID in that register, so the read never yields the expected
primecell value, the AMBA match fails, and the device is left stuck in
deferred probe indefinitely.

The Aggregator TNOC is fully described by the "qcom,coresight-agtnoc"
compatible, which binds via the platform driver by compatible string and
does not rely on reading the primecell ID register at all. Switch the
node to that standalone compatible so the device probes on hardware that
does not expose a readable CID, while remaining an Aggregator TNOC that
retains ATID functionality.

Fixes: f73959d86c15 ("arm64: dts: qcom: kaanapali: add coresight nodes")
Signed-off-by: Jie Gan <jie.gan@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kaanapali.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index 7aa9653bd456..e98f4aa4b141 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -5004,7 +5004,7 @@ tpdm_pcie_rscc_out: endpoint {
 		};
 
 		tn@111b8000 {
-			compatible = "qcom,coresight-tnoc", "arm,primecell";
+			compatible = "qcom,coresight-agtnoc";
 			reg = <0x0 0x111b8000 0x0 0x4200>;
 
 			clocks = <&aoss_qmp>;

-- 
2.34.1