[PATCH 1/8] dt-bindings: regulator: ROHM BD73800 regulators

[Matti Vaittinen]

From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>

Add bindings for the BUCKs and LDOs on ROHM BD73800. The PMIC state
specific voltages can be set in same fashion as with a few other ROHM
PMICs (for example with BD718[15,28,37,47,50,79]). Same properties are
recycled :)

The LDOs 1 and 4 can use different voltage ranges depending on the OTP
configuration.

Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
---
 .../regulator/rohm,bd73800-regulator.yaml     | 119 ++++++++++++++++++
 1 file changed, 119 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml
new file mode 100644
index 000000000000..c427a04098ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd73800-regulator.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd73800-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD73800 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@xxxxxxxxx>
+
+description: |
+  This module is part of the ROHM BD73800 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd73800-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  Regulator nodes should be named to buck<number> and ldo<number>.
+  The valid names for BD73800 regulator nodes are
+  buck1, buck2, buck3, buck4, buck5, buck6, buck7, buck8
+  ldo1, ldo2, ldo3, ldo4
+
+patternProperties:
+  "^buck[1-8]$":
+    type: object
+    description:
+      Properties for a single BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-8]$"
+        description:
+          should be "buck1", ..., "buck8"
+
+      rohm,dvs-run-voltage:
+        description:
+          PMIC default "RUN" state voltage in uV. 0 means disabled. See the
+          explanation below for regulator specific details.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3500000
+
+      rohm,dvs-idle-voltage:
+        description:
+          PMIC default "IDLE" state voltage in uV. 0 means disabled. See the
+          explanation below for regulator specific details.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3500000
+
+      rohm,dvs-suspend-voltage:
+        description:
+          PMIC default "SUSPEND" state voltage in uV. 0 means disabled. See the
+          explanation below for regulator specific details.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3500000
+
+        # BUCKs 1,2,3,4 and 8 support voltages 0.5 - 1.3V
+        # BUCK 5 supports voltages 0.3 - 1.3V
+        # BUCKs 6 and 7 support voltages 1.5 - 3.5V
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+  "^ldo[1-4]$":
+    type: object
+    description:
+      Properties for single LDO regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-4]$"
+        description:
+          should be "ldo1", ..., "ldo4"
+
+      rohm,dvs-run-voltage:
+        description:
+          Set the default output state at PMIC's "RUN" state.
+          0 is disabled, 1 is enabled.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1
+
+      rohm,dvs-idle-voltage:
+        description:
+          Set the default output state at PMIC's "IDLE" state.
+          0 is disabled, 1 is enabled.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1
+
+      rohm,dvs-suspend-voltage:
+        description:
+          Set the default output state at PMIC's "SUSPEND" state.
+          0 is disabled, 1 is enabled.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1
+
+      rohm,ldo-range-high:
+        type: boolean
+        description:
+          LDO1 and LDO3 voltage ranges can be "high" or "low" depending on
+          OTP. Indicate that the "high" range is used. See comment below
+          for voltages.
+
+        # LDOs 2 and 4 support voltages 0.75 - 3.3V
+        # LDOs 1 and 3 may support different ranges depending on OTP.
+        # either 0.6 - 1.8V or 0.75 - 3.3V.
+
+    unevaluatedProperties: false
+
+additionalProperties: false
-- 
2.54.0

Attachment: signature.asc
Description: PGP signature