[PATCH] staging: rtl8723bs: remove unnecessary braces from single statement blocks

From: Daniel Guihot

Date: Sun Jul 05 2026 - 15:36:18 EST


Remove braces around single statement blocks in rtl8723b_hal_init.c to
comply with the kernel code style, as reported by checkpatch.pl:

WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement

No functional change.

Signed-off-by: Daniel Guihot <daniel.guihot123@xxxxxxxxx>
---
.../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 32 +++++++------------
1 file changed, 12 insertions(+), 20 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index bcaf63b2893c..b74fdf66c772 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -194,9 +194,8 @@ static s32 polling_fwdl_chksum(
yield();
} while (jiffies_to_msecs(jiffies-start) < timeout_ms || cnt < min_cnt);

- if (!(value32 & FWDL_ChkSum_rpt)) {
+ if (!(value32 & FWDL_ChkSum_rpt))
goto exit;
- }

if (g_fwdl_chksum_fail) {
g_fwdl_chksum_fail--;
@@ -235,9 +234,8 @@ static s32 _FWFreeToGo(struct adapter *adapter, u32 min_cnt, u32 timeout_ms)
yield();
} while (jiffies_to_msecs(jiffies - start) < timeout_ms || cnt < min_cnt);

- if (!(value32 & WINTINI_RDY)) {
+ if (!(value32 & WINTINI_RDY))
goto exit;
- }

if (g_fwdl_wintint_rdy_fail) {
g_fwdl_wintint_rdy_fail--;
@@ -1031,9 +1029,8 @@ void UpdateHalRAMask8723B(struct adapter *padapter, u32 mac_id, u8 rssi_level)
rate_bitmap = hal_btcoex_GetRaMask(padapter);
mask &= ~rate_bitmap;

- if (pHalData->fw_ractrl) {
+ if (pHalData->fw_ractrl)
rtl8723b_set_FwMacIdConfig_cmd(padapter, mac_id, psta->raid, psta->bw_mode, short_gi_rate, mask);
- }

/* set correct initial date rate for each mac_id */
pdmpriv->INIDATA_RATE[mac_id] = psta->init_rate;
@@ -1184,9 +1181,9 @@ void Hal_EfuseParseIDCode(struct adapter *padapter, u8 *hwinfo)

/* Check 0x8129 again for making sure autoload status!! */
EEPROMId = le16_to_cpu(*((__le16 *)hwinfo));
- if (EEPROMId != RTL_EEPROM_ID) {
+ if (EEPROMId != RTL_EEPROM_ID)
pEEPROM->bautoload_fail_flag = true;
- } else
+ else
pEEPROM->bautoload_fail_flag = false;
}

@@ -1596,9 +1593,8 @@ static void rtl8723b_cal_txdesc_chksum(struct tx_desc *ptxdesc)
/* Thomas, Lucas@SD4, 20130515 */
count = 16;

- for (index = 0; index < count; index++) {
+ for (index = 0; index < count; index++)
checksum |= le16_to_cpu(*(__le16 *)(usPtr + index));
- }

ptxdesc->txdw7 |= cpu_to_le32(checksum & 0x0000ffff);
}
@@ -1772,11 +1768,10 @@ static void rtl8723b_fill_default_txdesc(
ptxdesc->mbssid = pattrib->mbssid & 0xF;

ptxdesc->rty_lmt_en = 1; /* retry limit enable */
- if (pattrib->retry_ctrl) {
+ if (pattrib->retry_ctrl)
ptxdesc->data_rt_lmt = 6;
- } else {
+ else
ptxdesc->data_rt_lmt = 12;
- }

ptxdesc->datarate = MRateToHwRate(pmlmeext->tx_rate);

@@ -1867,9 +1862,8 @@ void rtl8723b_fill_fake_txdesc(
SET_TX_DESC_HWSEQ_SEL_8723B(pDesc, 0);
}

- if (IsBTQosNull) {
+ if (IsBTQosNull)
SET_TX_DESC_BT_INT_8723B(pDesc, 1);
- }

SET_TX_DESC_USE_RATE_8723B(pDesc, 1); /* use data rate which is set by Sw */
SET_TX_DESC_OWN_8723B((u8 *)pDesc, 1);
@@ -2555,9 +2549,8 @@ void SetHwReg8723B(struct adapter *padapter, u8 variable, u8 *val)

/* Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power */
/* saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang. */
- if (psmode != PS_MODE_ACTIVE) {
+ if (psmode != PS_MODE_ACTIVE)
ODM_RF_Saving(&pHalData->odmpriv, true);
- }

/* if (psmode != PS_MODE_ACTIVE) { */
/* rtl8723b_set_lowpwr_lps_cmd(padapter, true); */
@@ -2871,11 +2864,10 @@ u8 GetHalDefVar8723B(struct adapter *padapter, enum hal_def_variable variable, v
break;

case HAL_DEF_TX_PAGE_BOUNDARY:
- if (!padapter->registrypriv.wifi_spec) {
+ if (!padapter->registrypriv.wifi_spec)
*(u8 *)pval = TX_PAGE_BOUNDARY_8723B;
- } else {
+ else
*(u8 *)pval = WMM_NORMAL_TX_PAGE_BOUNDARY_8723B;
- }
break;

case HAL_DEF_MACID_SLEEP:
--
2.54.0