Re: [PATCH v3 3/4] regulator: qcom_usb_vbus: add support for qcom,pm4125-vbus-reg

[Dmitry Baryshkov]

On Mon, Jul 06, 2026 at 06:01:07PM +0530, Rakesh Kota wrote:
> The PM4125 PMIC uses a different register layout for USB VBUS control
> compared to PM8150B. On PM4125, CMD_OTG is at offset 0x50, OTG_CFG is
> at 0x56, and offset 0x52 is a 2-bit VBOOST voltage selector rather than
> a current-limit selector.
> 
> Add pm4125_data using the abstraction introduced for PM8150B, along with
> dedicated voltage-selector ops and the pm4125_vboost_table covering the
> four supported boost voltages: 4.25 V, 4.5 V, 4.75 V, and 5.0 V.
> 
> Signed-off-by: Rakesh Kota <rakesh.kota@xxxxxxxxxxxxxxxx>
> ---
>  drivers/regulator/qcom_usb_vbus-regulator.c | 31 +++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>


-- 
With best wishes
Dmitry