[PATCH v2 4/7] media: as102: do not rely on id table address comparison

[Gary Guo]

The driver info should be retrieved using the driver_info field, not by
address comparison.

Signed-off-by: Gary Guo <gary@xxxxxxxxxxx>
---
 drivers/media/usb/as102/as102_usb_drv.c | 73 ++++++++++++++-------------------
 1 file changed, 30 insertions(+), 43 deletions(-)

diff --git a/drivers/media/usb/as102/as102_usb_drv.c b/drivers/media/usb/as102/as102_usb_drv.c
index a11024451ceb..be2f8be560fa 100644
--- a/drivers/media/usb/as102/as102_usb_drv.c
+++ b/drivers/media/usb/as102/as102_usb_drv.c
@@ -24,35 +24,33 @@ static void as102_usb_stop_stream(struct as102_dev_t *dev);
 static int as102_open(struct inode *inode, struct file *file);
 static int as102_release(struct inode *inode, struct file *file);
 
-static const struct usb_device_id as102_usb_id_table[] = {
-	{ USB_DEVICE(AS102_USB_DEVICE_VENDOR_ID, AS102_USB_DEVICE_PID_0001) },
-	{ USB_DEVICE(PCTV_74E_USB_VID, PCTV_74E_USB_PID) },
-	{ USB_DEVICE(ELGATO_EYETV_DTT_USB_VID, ELGATO_EYETV_DTT_USB_PID) },
-	{ USB_DEVICE(NBOX_DVBT_DONGLE_USB_VID, NBOX_DVBT_DONGLE_USB_PID) },
-	{ USB_DEVICE(SKY_IT_DIGITAL_KEY_USB_VID, SKY_IT_DIGITAL_KEY_USB_PID) },
-	{ } /* Terminating entry */
+struct as102_dev_info {
+	const char *name;
+	/*
+	 * eLNA configuration: devices built on the reference design work best
+	 * with 0xA0, while custom designs seem to require 0xC0
+	 */
+	uint8_t elna_cfg;
 };
 
-/* Note that this table must always have the same number of entries as the
-   as102_usb_id_table struct */
-static const char * const as102_device_names[] = {
-	AS102_REFERENCE_DESIGN,
-	AS102_PCTV_74E,
-	AS102_ELGATO_EYETV_DTT_NAME,
-	AS102_NBOX_DVBT_DONGLE_NAME,
-	AS102_SKY_IT_DIGITAL_KEY_NAME,
-	NULL /* Terminating entry */
-};
+#define DRIVER_INFO(dev_name, dev_elna_cfg) \
+	.driver_info = (kernel_ulong_t)&(const struct as102_dev_info){ \
+		.name = (dev_name), \
+		.elna_cfg = (dev_elna_cfg), \
+	}
 
-/* eLNA configuration: devices built on the reference design work best
-   with 0xA0, while custom designs seem to require 0xC0 */
-static uint8_t const as102_elna_cfg[] = {
-	0xA0,
-	0xC0,
-	0xC0,
-	0xA0,
-	0xA0,
-	0x00 /* Terminating entry */
+static const struct usb_device_id as102_usb_id_table[] = {
+	{ USB_DEVICE(AS102_USB_DEVICE_VENDOR_ID, AS102_USB_DEVICE_PID_0001),
+	  DRIVER_INFO(AS102_REFERENCE_DESIGN, 0xA0) },
+	{ USB_DEVICE(PCTV_74E_USB_VID, PCTV_74E_USB_PID),
+	  DRIVER_INFO(AS102_PCTV_74E, 0xC0) },
+	{ USB_DEVICE(ELGATO_EYETV_DTT_USB_VID, ELGATO_EYETV_DTT_USB_PID),
+	  DRIVER_INFO(AS102_ELGATO_EYETV_DTT_NAME, 0xC0) },
+	{ USB_DEVICE(NBOX_DVBT_DONGLE_USB_VID, NBOX_DVBT_DONGLE_USB_PID),
+	  DRIVER_INFO(AS102_NBOX_DVBT_DONGLE_NAME, 0xA0) },
+	{ USB_DEVICE(SKY_IT_DIGITAL_KEY_USB_VID, SKY_IT_DIGITAL_KEY_USB_PID),
+	  DRIVER_INFO(AS102_SKY_IT_DIGITAL_KEY_NAME, 0xA0) },
+	{ } /* Terminating entry */
 };
 
 struct usb_driver as102_usb_driver = {
@@ -336,29 +334,18 @@ static int as102_usb_probe(struct usb_interface *intf,
 {
 	int ret;
 	struct as102_dev_t *as102_dev;
-	int i;
-
-	/* This should never actually happen */
-	if (ARRAY_SIZE(as102_usb_id_table) !=
-	    (sizeof(as102_device_names) / sizeof(const char *))) {
-		pr_err("Device names table invalid size");
-		return -EINVAL;
-	}
+	const struct as102_dev_info *info = (const struct as102_dev_info *)id->driver_info;
 
 	as102_dev = kzalloc_obj(struct as102_dev_t);
 	if (as102_dev == NULL)
 		return -ENOMEM;
 
-	/* Assign the user-friendly device name */
-	for (i = 0; i < ARRAY_SIZE(as102_usb_id_table); i++) {
-		if (id == &as102_usb_id_table[i]) {
-			as102_dev->name = as102_device_names[i];
-			as102_dev->elna_cfg = as102_elna_cfg[i];
-		}
-	}
-
-	if (as102_dev->name == NULL)
+	if (info) {
+		as102_dev->name = info->name;
+		as102_dev->elna_cfg = info->elna_cfg;
+	} else {
 		as102_dev->name = "Unknown AS102 device";
+	}
 
 	/* set private callback functions */
 	as102_dev->bus_adap.ops = &as102_priv_ops;

-- 
2.54.0