Re: [PATCH v8 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices

[Aaron Kling]

On Mon, Jun 1, 2026 at 11:53 PM Aaron Kling <webgeek1234@xxxxxxxxx> wrote:
>
> On Sun, May 3, 2026 at 4:49 PM Aaron Kling via B4 Relay
> <devnull+webgeek1234.gmail.com@xxxxxxxxxx> wrote:
> >
> > This specifically includes:
> > * Odin 2 Mini
> > * Odin 2 Portal
> > * Thor
> >
> > The original Odin 2 dts is not currently included as it has not yet
> > been verified.
> >
> > The initial port was done by Teguh Sobirin for ROCKNIX and was made
> > available on the AYN github [0].
> >
> > Support has been removed for things not yet supported by the upstream
> > kernel, these will be added later when the related drivers are submitted
> > and picked up. Such includes:
> >
> > * All panels
> > * The Odin 2 Mini backlight and touch
> > * All rgb leds
> > * The built-in uart gamepad
> >
> > [0] https://github.com/AYNTechnologies/linux/commits/sm8550/v6.17.5/
> >
> > Signed-off-by: Aaron Kling <webgeek1234@xxxxxxxxx>
> > ---
> > Changes in v8:
> > - Properly order and format amplifier properties
> > - Set amplifiers name prefix to Amplifier L/R
> > - Link to v7: https://lore.kernel.org/r/20260430-ayn-qcs8550-v7-0-591a96735fa3@xxxxxxxxx
> >
> > Changes in v7:
> > - Add back pinmuxes dropped last revision, but without output-low
> > - Link to v6: https://lore.kernel.org/r/20260430-ayn-qcs8550-v6-0-06a7e7b54aaa@xxxxxxxxx
> >
> > Changes in v6:
> > - Fix comment style in patch 3
> > - Drop a pair of unnecessary pinmuxes in patch 3
> > - Lower usb sbu pins drive strength in patch 3
> > - Link to v5: https://lore.kernel.org/r/20260408-ayn-qcs8550-v5-0-c90abeb7a152@xxxxxxxxx
> >
> > Changes in v5:
> > - Fix some style reviews in patch 6 which required matching labels in
> >   patch 3
> > - Drop hdmi support in patch 4, since it doesn't work
> > - Link to v4: https://lore.kernel.org/r/20260323-ayn-qcs8550-v4-0-33a8ac3d53fa@xxxxxxxxx
> >
> > Changes in v4:
> > - Fold vendor description patch into the series
> > - Link to v3: https://lore.kernel.org/r/20260322-ayn-qcs8550-v3-0-4afa89c20888@xxxxxxxxx
> >
> > Changes in v3:
> > - Drop unused backlight regulator in patch 3
> > - Move zap shader firmware to standalone reference
> > - Move i2c controller enables from common to devices
> > - Add ABL dtbo workarounds to patch 2 as per:
> >   https://lore.kernel.org/linux-arm-msm/dczz4uvcq4hc6p3zb6xnrsgmfeomwliagwhf36tewdz4z6mndp@afbxzhjziiwv/
> > - Fix multiple property alphabetical order issues in patch 2
> > - Use interrupts-extended for pwm-fan in patch 2
> > - Ensure blank line before status in patches 2-5
> > - Rename spk_amp_l/r to amplifier in patch 2
> > - Remove a few properties that are already in the soc dtsi in patch 2
> > - Order tlmm nodes by pin index in patch 2
> > - Drop qcom,dll-config from sdhc node in patch 2
> > - Drop dtbo support, convert common to dtsi, and include it directly in
> >   device specific dts'
> > - Link to v2: https://lore.kernel.org/r/20260311-ayn-qcs8550-v2-0-e66986e0f0cb@xxxxxxxxx
> >
> > Changes in v2:
> > - Drop awinic bindings dep as a duplicated patch already exists
> > - Change Co-authored-by tags to Co-developed-by
> > - Drop alias to currently unused uart15 in patch 2
> > - Link to v1: https://lore.kernel.org/r/20260311-ayn-qcs8550-v1-0-fe8b2faad1ea@xxxxxxxxx
> >
> > ---
> > Aaron Kling (1):
> >       dt-bindings: arm: qcom: Add AYN QCS8550 Devices
> >
> > Teguh Sobirin (4):
> >       arm64: dts: qcom: Add AYN QCS8550 Common
> >       arm64: dts: qcom: Add AYN Odin 2 Mini
> >       arm64: dts: qcom: Add AYN Odin 2 Portal
> >       arm64: dts: qcom: Add AYN Thor
> >
> > Xilin Wu (1):
> >       dt-bindings: vendor-prefixes: Add AYN Technologies
> >
> >  Documentation/devicetree/bindings/arm/qcom.yaml    |    9 +
> >  .../devicetree/bindings/vendor-prefixes.yaml       |    2 +
> >  arch/arm64/boot/dts/qcom/Makefile                  |    3 +
> >  .../arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi | 1764 ++++++++++++++++++++
> >  .../boot/dts/qcom/qcs8550-ayntec-odin2mini.dts     |   44 +
> >  .../boot/dts/qcom/qcs8550-ayntec-odin2portal.dts   |   84 +
> >  arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts   |  227 +++
> >  7 files changed, 2133 insertions(+)
> > ---
> > base-commit: b9303e6bff706758c167af686b5315ad00233bf8
> > change-id: 20260217-ayn-qcs8550-16c07b63de26
> >
> > Best regards,
> > --
> > Aaron Kling <webgeek1234@xxxxxxxxx>
>
> Is there anything else I need to do for this series? Or is it just
> waiting to be picked up now?

I see other stuff getting picked up now, is there anything preventing
this series from going? The one outstanding comment is about things
that could be fixed up during apply.

Aaron