Re: [PATCH v2 1/4] arm64: dts: qcom: pm4125: Add VADC and temp alarm nodes

[Konrad Dybcio]

On 7/9/26 11:44 AM, Jishnu Prakash wrote:
> Add VADC node with some channels under it, for voltage and
> temperature readings. Add temperature alarm node, used for
> PMIC thermal mitigation.
> 
> Co-developed-by: Rakesh Kota <rakesh.kota@xxxxxxxxxxxxxxxx>
> Signed-off-by: Rakesh Kota <rakesh.kota@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jishnu Prakash <jishnu.prakash@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/pm4125.dtsi | 105 +++++++++++++++++++++++++++++++++++
>  1 file changed, 105 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm4125.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi
> index 542e8fe030da..62f101fe5353 100644
> --- a/arch/arm64/boot/dts/qcom/pm4125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi
> @@ -8,6 +8,36 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/spmi/spmi.h>
>  
> +/ {
> +	thermal-zones {
> +		pm4125-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;

=0 is the default, you can drop it

Konrad