Re: [PATCH] clk: en7523: reset PCIE HB on init for AN7581

[Christian Marangi]

On Wed, Jul 08, 2026 at 12:52:49PM -0400, Brian Masney wrote:
> Hi Christian,
> 
> Thanks for the patch.
> 
> On Wed, Jul 08, 2026 at 10:40:44AM +0200, Christian Marangi wrote:
> > It was reported that PCIE HB should be reset for AN7581 or some instability
> > or link training issue will be present on warm boot scenario.
> > 
> > Reset PCIE HB on clk HW init to handle warm boot problem with PCIe.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > ---
> >  drivers/clk/clk-en7523.c | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> > index 1ab0e2eca5d3..c450d89bfa96 100644
> > --- a/drivers/clk/clk-en7523.c
> > +++ b/drivers/clk/clk-en7523.c
> > @@ -57,6 +57,7 @@
> >  
> >  #define REG_RST_CTRL2			0x830
> >  #define REG_RST_CTRL1			0x834
> > +#define   REG_PCIE_HB_RST		BIT(29)
> >  #define EN751221_REG_RST_DMT		0x84
> >  #define EN751221_REG_RST_USB		0xec
> >  
> > @@ -853,6 +854,12 @@ static int en7581_clk_hw_init(struct platform_device *pdev,
> >  	val = readl(base + REG_NP_SCU_PCIC);
> >  	writel(val | 3, base + REG_NP_SCU_PCIC);
> >  
> > +	val = readl(base + REG_RST_CTRL1);
> > +	val |= REG_PCIE_HB_RST;
> > +	writel(val, base + REG_RST_CTRL1);
> > +	val &= ~REG_PCIE_HB_RST;
> > +	writel(val, base + REG_RST_CTRL1);
> > +
> 
> Sashiko has a question about whether or not a delay or a flush is needed
> between the writel() calls?
> 
> https://sashiko.dev/#/patchset/20260708084045.8380-1-ansuelsmth%40gmail.com
>

Hi Brian, from the test done by me and Airoha with their CI on 10000 test,
no delay is needed. If we want to be on the save side I can add it anyway
for consistency with the other code. What do you think?
 
-- 
	Ansuel