[PATCH 2/2] riscv: dts: spacemit: Add enough deassert time for the PHY on com260 board

[Inochi Amaoto]

RTL8211F require at least 50ms deassert to guarantee the register
access, 10ms is only enough for the PHY reset.

Fixes: cfe5c91cb73c ("riscv: dts: spacemit: k3: Initial support for CoM260-IFX board")
Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxx>
---
 arch/riscv/boot/dts/spacemit/k3-com260.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
index a38d7b738258..b704b537385c 100644
--- a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
@@ -178,7 +178,7 @@ phy1: phy@1 {
 			reg = <1>;
 			reset-gpios = <&gpio 1 5 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
+			reset-deassert-us = <50000>;
 		};
 	};
 };
-- 
2.55.0