Re: [PATCH v5 5/6] arm64: dts: qcom: ipq5018: add node required for Bluetooth support

[Bartosz Golaszewski]

On Thu, 9 Jul 2026 20:40:04 +0200, Konrad Dybcio
<konrad.dybcio@xxxxxxxxxxxxxxxx> said:
> On 7/9/26 8:25 PM, George Moussalem wrote:
>> On 7/9/26 22:17, Konrad Dybcio wrote:
>>> On 7/9/26 11:18 AM, George Moussalem via B4 Relay wrote:
>>>> From: George Moussalem <george.moussalem@xxxxxxxxxxx>
>>>>
>>>> Add node to enable Bluetooth support on the IPQ5018 platform.
>>>>
>>>> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxxxxxxxx>
>>>> Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
>>>> ---
>>>>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 16 ++++++++++++++++
>>>>  1 file changed, 16 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>>> index 6f8004a22a1f..8c252fa3ff5b 100644
>>>> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>>> @@ -453,6 +453,22 @@ tcsr: syscon@1937000 {
>>>>  			reg = <0x01937000 0x21000>;
>>>>  		};
>>>>
>>>> +		bluetooth: bluetooth@7000000 {
>>>> +			compatible = "qcom,ipq5018-bt";
>>>> +			reg = <0x07000000 0x58000>;
>>>> +
>>>> +			firmware-name = "qca/bt_fw_patch.mbn";
>>>
>>> Hm, rethinking this, it must have ipq5018 somewhere in the name
>>
>> I agree but all QCA BT firmware and rampatches are published in the
>> /lib/firmware/qca directory, see:
>> https://git.kernel.org/pub/scm/linux/kernel/git/ath/linux-firmware.git/tree/qca
>
> +Jeff, Bartosz?
>

I'm not sure what the question is. This particular blob doesn't seem to exist
anywhere in linux-firmware yet. I agree, ideally the platform name should be in
the firmware name so let's upstream it to linux-firmware as such? Am I missing
something?

Bartosz