Re: [PATCH v2 0/2] rtsx_usb: fix tray-reader false card detect and autosuspend

From: Greg Kroah-Hartman

Date: Fri Jul 10 2026 - 10:23:34 EST


On Fri, Jul 10, 2026 at 03:21:51PM +0200, Ulf Hansson wrote:
> On Mon, Jul 6, 2026 at 5:40 PM Sean Rhodes <sean@starlabs.systems> wrote:
> >
> > This series fixes the empty-tray detect loop seen on a Realtek RTS5129
> > USB SD reader, while also avoiding USB register accesses from the USB
> > runtime autosuspend callback.
> >
> > Compared with the previous RFC, this no longer qualifies media by issuing
> > SD/MMC commands from ->get_cd(). The rtsx_usb_sdmmc child still reports
> > the raw card-detect state initially, then lets the normal MMC rescan path
> > probe the media. If an initialization command times out before a card is
> > attached, the SD child suppresses the raw SD_CD signal until the tray/card
> > detect line drops again.
> >
> > The parent rtsx_usb change removes USB I/O from runtime autosuspend and
> > keeps only the existing Memory Stick autosuspend deferral based on cached
> > card-status bits. Raw SD_CD is not used as a parent autosuspend blocker,
> > because this reader can assert it for an empty tray.
> >
> > Runtime-tested on a StarLite Mk V with Realtek RTS5129 (0bda:0129), using
> > these changes as a matched rtsx_usb/rtsx_usb_sdmmc/rtsx_usb_ms module set
> > on Linux 7.0.0-27-generic.
> >
> > Device enumeration:
> > Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
> > /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M
> > |__ Port 004: Dev 003, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
> >
> > Card inserted:
> > mmc0: new UHS-I speed SDR50 SDXC card at address 544c
> > mmcblk0: mmc0:544c LX2TB 1.82 TiB
> > mmcblk0: p1
> >
> > Deep S3 with the card inserted:
> > PM: suspend entry (deep)
> > ACPI: PM: Waking up from system sleep state S3
> > PM: suspend exit
> >
> > After resume, the card remained visible:
> > NAME SIZE TYPE FSTYPE MOUNTPOINTS
> > mmcblk0 1.8T disk
> > `-mmcblk0p1 1.8T part exfat
> >
> > Empty tray:
> > mmc0: card 544c removed
> > /sys/bus/usb/devices/1-4/power/control=auto
> > /sys/bus/usb/devices/1-4/power/runtime_status=suspended
> > /sys/bus/usb/devices/1-4/power/runtime_usage=0
> >
> > With the empty tray left inserted for about three minutes, no repeated
> > MMC detect attempts, command timeouts, or USB reset churn were observed.
> >
> > Sean Rhodes (2):
> > misc: rtsx_usb: avoid USB I/O in runtime autosuspend
> > mmc: rtsx_usb_sdmmc: suppress false CD after init timeout
> >
> > drivers/misc/cardreader/rtsx_usb.c | 26 ++++++++++++++++++++------
> > drivers/mmc/host/rtsx_usb_sdmmc.c | 13 ++++++++++++-
> > include/linux/rtsx_usb.h | 3 +++
> > 3 files changed, 35 insertions(+), 7 deletions(-)
> >
>
> I decided to queue the series for next to get it thoroughly tested.
> Potentially we should also tag these for stable kernels, but let's get
> it tested a bit more in next first.
>
> Greg, please let me know if you have any objections that I pick this
> via my mmc tree, or please provide your ack.

No objection from me:

Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>