Re: [PATCH v3 1/2] dt-bindings: thermal: imx: Document calibration offset property
From: Conor Dooley
Date: Fri Jul 10 2026 - 12:46:02 EST
On Fri, Jul 10, 2026 at 10:50:40AM +0800, HaoNing Cheng via B4 Relay wrote:
> From: HaoNing Cheng <Haoning.CHENG@xxxxxxxxxxxx>
>
> Some boards need a small per-design correction to align the reported CPU
> temperature with board-level measurements.
>
> Document the optional fsl,temp-calibration-offset-millicelsius property,
> a signed offset in millicelsius that is added to the calculated sensor
> temperature. The property is optional and the existing behaviour is kept
> when it is omitted.
>
> Update the binding example to show its usage.
>
> Signed-off-by: HaoNing Cheng <Haoning.CHENG@xxxxxxxxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
pw-bot: not-applicable
> ---
> Documentation/devicetree/bindings/thermal/imx-thermal.yaml | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
> index 949b154856c5..704bf2fa48cf 100644
> --- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
> @@ -59,6 +59,15 @@ properties:
> clocks:
> maxItems: 1
>
> + fsl,temp-calibration-offset-millicelsius:
> + maxItems: 1
> + description:
> + A signed calibration offset, in millicelsius, added to the calculated
> + sensor temperature to compensate for board-level measurement
> + differences. When absent, no offset is applied.
> + minimum: -28580
> + maximum: 28580
> +
> "#thermal-sensor-cells":
> const: 0
>
> @@ -109,6 +118,7 @@ examples:
> nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
> nvmem-cell-names = "calib", "temp_grade";
> clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
> + fsl,temp-calibration-offset-millicelsius = <(-6400)>;
> #thermal-sensor-cells = <0>;
> };
> };
>
> --
> 2.43.0
>
>
Attachment:
signature.asc
Description: PGP signature