RE: [PATCH v4 4/5] pinctrl: renesas: rzg2l: Add RZ/G3S support for selecting the I3C power source

From: Biju Das

Date: Mon Jul 13 2026 - 10:09:45 EST


Hi Claudiu,

> -----Original Message-----
> From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
> Sent: 13 July 2026 14:19
> Subject: Re: [PATCH v4 4/5] pinctrl: renesas: rzg2l: Add RZ/G3S support for selecting the I3C power
> source
>
> Hi, Biju,
>
> On 7/12/26 17:55, Biju Das wrote:
> > Hi Claudiu,
> >
> > Thanks for the patch.
> >
> >> -----Original Message-----
> >> From: Claudiu Beznea <claudiu.beznea+renesas@xxxxxxxxx>
> >> Sent: 10 July 2026 12:37
> >> Subject: [PATCH v4 4/5] pinctrl: renesas: rzg2l: Add RZ/G3S support
> >> for selecting the I3C power source
> >>
> >> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >>
> >> The Renesas RZ/G3S I3C pins can be powered at either 1.8V or 1.2V.
> >> The pin controller provides a register to select between these two options.
> >> Update the Renesas RZ/G2L pin controller driver to allow selecting the I3C power source on RZ/G3S SoC.
> >>
> >> Reviewed-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> >> Tested-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >> ---
> >>
> >> Changes in v4:
> >> - none
> >>
> >> Changes in v3:
> >> - collected tags
> >>
> >> Changes in v2:
> >> - none
> >>
> >> drivers/pinctrl/renesas/pinctrl-rzg2l.c | 73 +++++++++++++++++++++++--
> >> 1 file changed, 68 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> >> b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> >> index b52a85066f63..9a0706fea220 100644
> >> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> >> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> >> @@ -69,6 +69,7 @@
> >> #define PIN_CFG_PVDD1833_OTH_AWO_POC BIT(19) /* known on RZ/G3L only */
> >> #define PIN_CFG_PVDD1833_OTH_ISO_POC BIT(20) /* known on RZ/G3L only */
> >> #define PIN_CFG_WDTOVF_N_POC BIT(21) /* known on RZ/G3L only */
> >> +#define PIN_CFG_IO_VMC_I3C BIT(22)
> >>
> >> #define RZG2L_SINGLE_PIN BIT_ULL(63) /* Dedicated pin */
> >> #define RZG2L_VARIABLE_CFG BIT_ULL(62) /* Variable cfg for port pins */
> >> @@ -186,6 +187,9 @@
> >> #define PVDD_3300 0 /* I/O domain voltage >= 3.3V */
> >> #define PVDD_MASK 0x3
> >>
> >> +#define PVDD_I3C_1200 1 /* I3C I/O domain voltage 1.2V */
> >> +#define PVDD_I3C_1800 0 /* I3C I/O domain voltage 1.8V */
> >> +
> >> #define PWPR_B0WI BIT(7) /* Bit Write Disable */
> >> #define PWPR_PFCWE BIT(6) /* PFC Register Write Enable */
> >> #define PWPR_REGWE_A BIT(6) /* PFC and PMC Register Write Enable on RZ/V2H(P) */
> >> @@ -257,6 +261,7 @@ static const struct pin_config_item renesas_rzv2h_conf_items[] = {
> >> * @oen: OEN register offset
> >> * @qspi: QSPI register offset
> >> * @other_poc: OTHER_POC register offset
> >> + * @i3c_set: I3C_SET register offset
> >> */
> >> struct rzg2l_register_offsets {
> >> u16 pwpr;
> >> @@ -265,6 +270,7 @@ struct rzg2l_register_offsets {
> >> u16 oen;
> >> u16 qspi;
> >> u16 other_poc;
> >> + u16 i3c_set;
> >
> >
> >> };
> >>
> >> /**
> >> @@ -272,6 +278,7 @@ struct rzg2l_register_offsets {
> >> * @other_poc_pvdd1833_oth_awo_poc: PVDD1833_OTH_AWO_POC mask
> >> * @other_poc_pvdd1833_oth_iso_poc: PVDD1833_OTH_ISO_POC mask
> >> * @other_poc_wdtovf_n_poc: WDTOVF_N_POC mask
> >> + * @i3c_set_poc: I3C_SET_POC mask
> >> */
> >> struct rzg2l_register_masks {
> >> union {
> >> @@ -281,6 +288,11 @@ struct rzg2l_register_masks {
> >> u8 other_poc_pvdd1833_oth_iso_poc;
> >> u8 other_poc_wdtovf_n_poc;
> >> };
> >> +
> >> + /* RZ/G3S masks */
> >> + struct {
> >> + u8 i3c_set_poc;
> >
> > How this POC is different from Ethernet, SDHI and XSPI POC?
>
> Different bit mask and offset for I3C SET_POC compared with ETH, SDHI, XSPI.

RZ/G3L has i3c_set_poc, which has same bitmask as other_poc_wdtovf_n_poc.
Maybe create register specific masks??

struct other_poc and struct i3c_set instead of union. So that both RZ/G3L and
RZ/G3S can share the same struct for i3c.

Cheers,
Biju