[PATCH] loop: remove manually added partitions on detach

[Daan De Meyer via B4 Relay]

From: Daan De Meyer <daan@xxxxxxxxxxxx>

Commit 267ec4d7223a ("loop: fix partition scan race between udev and
loop_reread_partitions()") stopped disk_force_media_change() from
setting GD_NEED_PART_SCAN because loop devices with LO_FLAGS_PARTSCAN
rescan partitions explicitly. However, partitions can also be added
manually with BLKPG while LO_FLAGS_PARTSCAN is clear.

When such a loop device is detached, __loop_clr_fd() skips
bdev_disk_changed(). Without GD_NEED_PART_SCAN, reopening the unbound
device no longer performs the previous lazy cleanup, leaving dead
partition devices behind. A subsequent LOOP_CONFIGURE can then fail its
partition scan with -EBUSY, as seen in blktests loop/009 after loop/008.

Call bdev_disk_changed() unconditionally during __loop_clr_fd(). The
disk capacity is already zero and the release path holds open_mutex, so
this drops all partitions without rescanning the detached backing file.

The new blktests loop/013 case covers this sequence by adding a partition
with BLKPG without LO_FLAGS_PARTSCAN, detaching the loop device, and
checking that the partition is gone when the device is reopened.

Fixes: 267ec4d7223a ("loop: fix partition scan race between udev and loop_reread_partitions()")
Reported-by: kernel test robot <oliver.sang@xxxxxxxxx>
Closes: https://lore.kernel.org/oe-lkp/202607150754.b660f5b9-lkp@xxxxxxxxx
Signed-off-by: Daan De Meyer <daan@xxxxxxxxxxxx>
---
 drivers/block/loop.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 310de0463beb..1faecef33009 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1113,6 +1113,7 @@ static void __loop_clr_fd(struct loop_device *lo)
 	struct queue_limits lim;
 	struct file *filp;
 	gfp_t gfp = lo->old_gfp_mask;
+	int err;
 
 	spin_lock_irq(&lo->lo_lock);
 	filp = lo->lo_backing_file;
@@ -1146,26 +1147,21 @@ static void __loop_clr_fd(struct loop_device *lo)
 
 	disk_force_media_change(lo->lo_disk);
 
-	if (lo->lo_flags & LO_FLAGS_PARTSCAN) {
-		int err;
-
-		/*
-		 * open_mutex has been held already in release path, so don't
-		 * acquire it if this function is called in such case.
-		 *
-		 * If the reread partition isn't from release path, lo_refcnt
-		 * must be at least one and it can only become zero when the
-		 * current holder is released.
-		 */
-		err = bdev_disk_changed(lo->lo_disk, false);
-		if (err)
-			pr_warn("%s: partition scan of loop%d failed (rc=%d)\n",
-				__func__, lo->lo_number, err);
-		/* Device is gone, no point in returning error */
-	}
+	/*
+	 * Remove all partitions, including partitions added manually with
+	 * BLKPG, which may exist even if LO_FLAGS_PARTSCAN is not set.
+	 *
+	 * open_mutex has been held already in release path, so don't acquire
+	 * it here.
+	 */
+	err = bdev_disk_changed(lo->lo_disk, false);
+	if (err)
+		pr_warn("%s: partition scan of loop%d failed (rc=%d)\n",
+			__func__, lo->lo_number, err);
+	/* Device is gone, no point in returning error */
 
 	/*
-	 * lo->lo_state is set to Lo_unbound here after above partscan has
+	 * lo->lo_state is set to Lo_unbound here after removing partitions has
 	 * finished. There cannot be anybody else entering __loop_clr_fd() as
 	 * Lo_rundown state protects us from all the other places trying to
 	 * change the 'lo' device.

---
base-commit: a13c140cc289c0b7b3770bce5b3ad42ab35074aa
change-id: 20260715-b4-loop-partition-cleanup-094780c0698b

Best regards,
--  
Daan De Meyer <daan@xxxxxxxxxxxx>