[PATCH 0/3] Add AD5710R/AD5711R DAC

[Kim Seer Paller]

The AD5710R (16-bit) and AD5711R (12-bit) are 8-channel, low-power,
configurable current/voltage output DACs with an on-chip 2.5V reference.
Each channel can be independently configured as a voltage output
(0V to VREF or 0V to 2xVREF) or a current output (0mA to 50mA).

This series adds support for these parts:
 - ABI documentation for the high_z powerdown mode and the current-output
   powerdown attributes
 - device tree bindings for the AD5710R/AD5711R
 - basic IIO DAC driver, supporting per-channel voltage/current output
   selection, per-channel powerdown, software or hardware (LDAC) DAC
   updates, optional output range doubling, internal or external
   reference, and hardware reset (with a software-reset fallback).

Datasheet:
https://www.analog.com/media/en/technical-documentation/data-sheets/ad5711r-ad5710r.pdf

Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
---
Kim Seer Paller (3):
      iio: ABI: add DAC high_z powerdown mode and current output entries
      dt-bindings: iio: dac: add adi,ad5710r.yaml
      iio: dac: ad5710r: Add driver for AD5710R and AD5711R

 Documentation/ABI/testing/sysfs-bus-iio            |  10 +-
 .../devicetree/bindings/iio/dac/adi,ad5710r.yaml   | 143 ++++++
 MAINTAINERS                                        |   8 +
 drivers/iio/dac/Kconfig                            |  11 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/ad5710r.c                          | 484 +++++++++++++++++++++
 6 files changed, 656 insertions(+), 1 deletion(-)
---
base-commit: aa58ecc73466d0cb8c418de98e2225490bf600e3
change-id: 20260716-iio-ad5710r-upstream-e41c298614c6

Best regards,
--  
Kim Seer Paller <kimseer.paller@xxxxxxxxxx>