Re: [PATCH v2 0/6] Add audio support for QCS6490 RubikPi3

[Krzysztof Kozlowski]

On Wed, Jul 15, 2026 at 10:02:49PM +0800, Hongyang Zhao wrote:
> Add audio support for the Thundercomm RubikPi3 board based on QCS6490.
> 
> RubikPi3 uses AudioReach/GPR on the ADSP. An ES8316 codec connected to
> primary MI2S provides headset playback, headset capture and jack
> detection. The LT9611 bridge connected to quaternary MI2S provides HDMI
> audio playback.
> 
> The series first documents the existing ES8316 jack-detect inversion
> property and adds a board-specific Qualcomm sound-card compatible. A
> generic Qualcomm headset helper is then added for codecs which implement
> component jack detection but are not connected through a WCD codec DMA
> link.
> 
> The sc8280xp machine driver board data is converted to a per-DAI
> representation. This allows each backend to select its own DAI format,
> clock programming and jack setup. RubikPi3 uses this to drive the ES8316
> with a 19.2 MHz MCLK and to avoid unsupported sysclk programming on the
> LT9611 HDMI link.
> 
> The final patch describes the two audio paths, clocks, pin control,
> codec power and jack-detect wiring in the RubikPi3 device tree.
> 
> This series is based on next-20260710 and depends on Rafi's
> q6apm-lpass-dais MI2S clock control series and Neil's q6prm MCLK clock
> ID patch:
> 
> Depends-on: https://lore.kernel.org/all/20260714145250.2473461-1-mohammad.rafi.shaik@xxxxxxxxxxxxxxxx/
> Depends-on: https://lore.kernel.org/all/20251008-topic-sm8x50-next-hdk-i2s-v2-1-6b7d38d4ad5e@xxxxxxxxxx/

That's RFC with comments, so why do you send your patchset knowing IT
CANNOT BE merged?

Last days Mark complained, Rob complained, sure, we can ignore
maintainers, but just stop for a second and think: what can we do with
your patchset? Really, what can we do?

Best regards,
Krzysztof