[PATCH 31/31] swim: Unexport global symbols

[Finn Thain]

These symbols aren't used outside of this file so use local ones.
No functional change.

Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxx>
---
 drivers/block/swim_asm.S | 251 ++++++++++++++++++++-------------------
 1 file changed, 128 insertions(+), 123 deletions(-)

diff --git a/drivers/block/swim_asm.S b/drivers/block/swim_asm.S
index c17a25e1cd33..65b4e4658e10 100644
--- a/drivers/block/swim_asm.S
+++ b/drivers/block/swim_asm.S
@@ -14,33 +14,33 @@
  * 2008-11-05 (lv) - add get_swim_mode
  */
 
-	.equ	write_data,	0x0000
-	.equ	write_mark,	0x0200
-	.equ	write_CRC,	0x0400
-	.equ	write_parameter,0x0600
-	.equ	write_phase,	0x0800
-	.equ	write_setup,	0x0a00
-	.equ	write_mode0,	0x0c00
-	.equ	write_mode1,	0x0e00
-	.equ	read_data,	0x1000
-	.equ	read_mark,	0x1200
-	.equ	read_error,	0x1400
-	.equ	read_parameter,	0x1600
-	.equ	read_phase,	0x1800
-	.equ	read_setup,	0x1a00
-	.equ	read_status,	0x1c00
-	.equ	read_handshake,	0x1e00
-
-	.equ	o_side, 0
-	.equ	o_track, 1
-	.equ	o_sector, 2
-	.equ	o_size, 3
-	.equ	o_crc0, 4
-	.equ	o_crc1, 5
-
-	.equ	seek_time, 30000
-	.equ	max_retry, 40
-	.equ	sector_size, 512
+	.equ	.Lwrite_data,		0x0000
+	.equ	.Lwrite_mark,		0x0200
+	.equ	.Lwrite_CRC,		0x0400
+	.equ	.Lwrite_parameter,	0x0600
+	.equ	.Lwrite_phase,		0x0800
+	.equ	.Lwrite_setup,		0x0a00
+	.equ	.Lwrite_mode0,		0x0c00
+	.equ	.Lwrite_mode1,		0x0e00
+	.equ	.Lread_data,		0x1000
+	.equ	.Lread_mark,		0x1200
+	.equ	.Lread_error,		0x1400
+	.equ	.Lread_parameter,	0x1600
+	.equ	.Lread_phase,		0x1800
+	.equ	.Lread_setup,		0x1a00
+	.equ	.Lread_status,		0x1c00
+	.equ	.Lread_handshake,	0x1e00
+
+	.equ	.Lo_side,		0
+	.equ	.Lo_track,		1
+	.equ	.Lo_sector,		2
+	.equ	.Lo_size,		3
+	.equ	.Lo_crc0,		4
+	.equ	.Lo_crc1,		5
+
+	.equ	.Lseek_time,		30000
+	.equ	.Lmax_retry,		40
+	.equ	.Lsector_size,		512
 
 	.equ	.Lmr_clear_fifo,	0x01
 	.equ	.Lmr_action,		0x08
@@ -56,91 +56,96 @@ swim_read_sector_header:
 	moveml	%d1-%d5/%a0-%a5,%sp@-
 	movel	%a6@(0x0c), %a4
 	moveq	#-1, %d0
-	bsr	mfm_read_addrmark
+	bsr	.Lmfm_read_addrmark
 	moveml	%sp@+, %d1-%d5/%a0-%a5
 	unlk	%a6
 	rts
 
-sector_address_mark:
+.Lsector_address_mark:
 	.byte	0xa1, 0xa1, 0xa1, 0xfe
-sector_data_mark:
+.Lsector_data_mark:
 	.byte	0xa1, 0xa1, 0xa1, 0xfb
 
-mfm_read_addrmark:
+.Lmfm_read_addrmark:
 	movel	%a6@(0x08), %a3
-	lea	%a3@(read_handshake), %a2
-	lea	%a3@(read_data), %a5
-	lea	%a3@(read_mark), %a3
-	movew	#seek_time, %d2
-
-wait_header_init:
-	moveb	#.Lmr_write_action, %a3@(write_mode0 - read_mark)
-	moveb	#.Lmr_clear_fifo, %a3@(write_mode1 - read_mark)
-	moveb	#.Lmr_clear_fifo, %a3@(write_mode0 - read_mark)
-	tstb	%a3@(read_error - read_mark)
-	moveb	#.Lmr_action, %a3@(write_mode1 - read_mark)
-
-	lea	sector_address_mark, %a0
+	lea	%a3@(.Lread_handshake), %a2
+	lea	%a3@(.Lread_data), %a5
+	lea	%a3@(.Lread_mark), %a3
+	movew	#.Lseek_time, %d2
+
+.Lwait_header_init:
+	moveb	#.Lmr_write_action, %a3@(.Lwrite_mode0 - .Lread_mark)
+	moveb	#.Lmr_clear_fifo, %a3@(.Lwrite_mode1 - .Lread_mark)
+	moveb	#.Lmr_clear_fifo, %a3@(.Lwrite_mode0 - .Lread_mark)
+	tstb	%a3@(.Lread_error - .Lread_mark)
+	moveb	#.Lmr_action, %a3@(.Lwrite_mode1 - .Lread_mark)
+
+	lea	.Lsector_address_mark, %a0
 	moveq	#3, %d1
 
-wait_addr_mark_byte:
+.Lwait_addr_mark_byte:
 	tstb	%a2@
-	dbmi	%d2, wait_addr_mark_byte
-	bpl	signal_nonyb
+	dbmi	%d2, .Lwait_addr_mark_byte
+	bpl	.Lsignal_nonyb
 
 	moveb	%a3@, %d3
 	cmpb	%a0@+, %d3
-	dbne	%d1, wait_addr_mark_byte
-	bne	wait_header_init
+	dbne	%d1, .Lwait_addr_mark_byte
+	bne	.Lwait_header_init
 
-	moveq	#max_retry, %d2
-amark0:	tstb	%a2@
-	dbmi	%d2, amark0
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lamark0:
+	tstb	%a2@
+	dbmi	%d2, .Lamark0
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_track)
+	moveb	%a5@, %a4@(.Lo_track)
 
-	moveq	#max_retry, %d2
-amark1:	tstb	%a2@
-	dbmi	%d2, amark1
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lamark1:
+	tstb	%a2@
+	dbmi	%d2, .Lamark1
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_side)
+	moveb	%a5@, %a4@(.Lo_side)
 
-	moveq	#max_retry, %d2
-amark2:	tstb	%a2@
-	dbmi	%d2, amark2
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lamark2:
+	tstb	%a2@
+	dbmi	%d2, .Lamark2
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_sector)
+	moveb	%a5@, %a4@(.Lo_sector)
 
-	moveq	#max_retry, %d2
-amark3:	tstb	%a2@
-	dbmi	%d2, amark3
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lamark3:
+	tstb	%a2@
+	dbmi	%d2, .Lamark3
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_size)
+	moveb	%a5@, %a4@(.Lo_size)
 
-	moveq	#max_retry, %d2
-crc0:	tstb	%a2@
-	dbmi	%d2, crc0
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lcrc0:
+	tstb	%a2@
+	dbmi	%d2, .Lcrc0
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_crc0)
+	moveb	%a5@, %a4@(.Lo_crc0)
 
-	moveq	#max_retry, %d2
-crc1:	moveb	%a2@, %d5
-	dbmi	%d2, crc1
-	bpl	signal_nonyb
+	moveq	#.Lmax_retry, %d2
+.Lcrc1:	moveb	%a2@, %d5
+	dbmi	%d2, .Lcrc1
+	bpl	.Lsignal_nonyb
 
-	moveb	%a5@, %a4@(o_crc1)
+	moveb	%a5@, %a4@(.Lo_crc1)
 
 	andb	#.Lhr_crc_error, %d5
-	bne	signal_nonyb
+	bne	.Lsignal_nonyb
 
 	moveq	#0, %d0
-signal_nonyb:
-	moveb	#.Lmr_write_action, %a3@(write_mode0 - read_mark)
+.Lsignal_nonyb:
+	moveb	#.Lmr_write_action, %a3@(.Lwrite_mode0 - .Lread_mark)
 	rts
 
 	.global swim_read_sector_data
@@ -149,86 +154,86 @@ swim_read_sector_data:
 	moveml	%d1-%d5/%a0-%a5,%sp@-
 	movel	%a6@(0x0c), %a4
 	moveq	#-1, %d0
-	bsr	mfm_read_data
+	bsr	.Lmfm_read_data
 	moveml	%sp@+, %d1-%d5/%a0-%a5
 	unlk	%a6
 	rts
 
-mfm_read_data:
+.Lmfm_read_data:
 	movel	%a6@(0x08), %a3
-	lea	%a3@(read_handshake), %a2
-	lea	%a3@(read_data), %a5
-	lea	%a3@(read_mark), %a3
-	movew	#seek_time, %d2
-
-wait_data_init:
-	moveb	#.Lmr_write_action, %a3@(write_mode0 - read_mark)
-	moveb	#.Lmr_clear_fifo, %a3@(write_mode1 - read_mark)
-	moveb	#.Lmr_clear_fifo, %a3@(write_mode0 - read_mark)
-	tstb	%a3@(read_error - read_mark)
-	moveb	#.Lmr_action, %a3@(write_mode1 - read_mark)
-
-	lea	sector_data_mark, %a0
+	lea	%a3@(.Lread_handshake), %a2
+	lea	%a3@(.Lread_data), %a5
+	lea	%a3@(.Lread_mark), %a3
+	movew	#.Lseek_time, %d2
+
+.Lwait_data_init:
+	moveb	#.Lmr_write_action, %a3@(.Lwrite_mode0 - .Lread_mark)
+	moveb	#.Lmr_clear_fifo, %a3@(.Lwrite_mode1 - .Lread_mark)
+	moveb	#.Lmr_clear_fifo, %a3@(.Lwrite_mode0 - .Lread_mark)
+	tstb	%a3@(.Lread_error - .Lread_mark)
+	moveb	#.Lmr_action, %a3@(.Lwrite_mode1 - .Lread_mark)
+
+	lea	.Lsector_data_mark, %a0
 	moveq	#3, %d1
 
 	/* wait data address mark */
 
-wait_data_mark_byte:
+.Lwait_data_mark_byte:
 	tstb	%a2@
-	dbmi	%d2, wait_data_mark_byte
-	bpl	data_exit
+	dbmi	%d2, .Lwait_data_mark_byte
+	bpl	.Ldata_exit
 
 	moveb	%a3@, %d3
 	cmpb	%a0@+, %d3
-	dbne	%d1, wait_data_mark_byte
-	bne	wait_data_init
+	dbne	%d1, .Lwait_data_mark_byte
+	bne	.Lwait_data_init
 
 	/* read data */
 
-	movel	#sector_size - 1, %d4		/* sector size */
-read_new_data:
-	movew	#max_retry, %d2
-read_data_loop:
+	movel	#.Lsector_size - 1, %d4		/* sector size */
+.Lread_new_data:
+	movew	#.Lmax_retry, %d2
+.Lread_data_loop:
 	moveb	%a2@, %d5
 	andb	#(.Lhr_fifo_2bytes + .Lhr_fifo_1byte), %d5
 	beq	1f
-	movew	#max_retry, %d2
+	movew	#.Lmax_retry, %d2
 	moveb	%a5@, %a4@+
 	dbra	%d4, 1f
-	bra	data_crc0
+	bra	.Ldata_crc0
 1:	andb	#.Lhr_fifo_2bytes, %d5
-	dbne	%d2, read_data_loop
-	beq	data_exit
+	dbne	%d2, .Lread_data_loop
+	beq	.Ldata_exit
 	moveb	%a5@, %a4@+
-	dbra	%d4, read_new_data
+	dbra	%d4, .Lread_new_data
 
 	/* read CRC */
 
-	movew	#max_retry, %d2
-data_crc0:
+	movew	#.Lmax_retry, %d2
+.Ldata_crc0:
 	tstb	%a2@
-	dbmi	%d2, data_crc0
-	bpl	data_exit
+	dbmi	%d2, .Ldata_crc0
+	bpl	.Ldata_exit
 
 	moveb	%a5@, %d2
 
-	moveq	#max_retry, %d2
-data_crc1:
+	moveq	#.Lmax_retry, %d2
+.Ldata_crc1:
 	moveb	%a2@, %d5
-	dbmi	%d2, data_crc1
-	bpl	data_exit
+	dbmi	%d2, .Ldata_crc1
+	bpl	.Ldata_exit
 
 	moveb	%a5@, %d2
 
 	andb	#.Lhr_crc_error, %d5
-	bne	data_exit
+	bne	.Ldata_exit
 
 	/* return number of bytes read */
 
-	movel	#sector_size, %d0
+	movel	#.Lsector_size, %d0
 	addw	#1, %d4
 	subl	%d4, %d0
 
-data_exit:
-	moveb	#.Lmr_write_action, %a3@(write_mode0 - read_mark)
+.Ldata_exit:
+	moveb	#.Lmr_write_action, %a3@(.Lwrite_mode0 - .Lread_mark)
 	rts
-- 
2.52.0