[PATCH 1/2] dt-bindings: phy: Document MT8196 MediaTek PCI-Express Gen4 S-PHY

[AngeloGioacchino Del Regno]

This adds bindings for the PCI-Express Gen4 S-PHY found in newer
MediaTek SoCs, such as MT8196 and its variants.

In the current "revision 3", depending on the specific port, this
S-PHY supports up to two lanes of PCI-Express Gen 4 and both EP
and RC modes.
It is not clear whether revisions/versions earlier than 3 have
ever been shipped in any other MediaTek SoC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
 .../phy/mediatek,mt8196-pcie-sphy.yaml        | 91 +++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8196-pcie-sphy.yaml

diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8196-pcie-sphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8196-pcie-sphy.yaml
new file mode 100644
index 000000000000..2b61882c402c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,mt8196-pcie-sphy.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt8196-pcie-sphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCI-Express Gen4 S-PHY
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
+
+description:
+  The MediaTek PCI-Express Gen4 S-PHY is capable of data serialization
+  and de-serialization with 8, 10, 128 or 130 bits (16GT/s) encoding
+  and decoding, has analog buffers, elastic buffers and mechanisms for
+  receiver detection.
+  This PHY supports link rates of 2.5, 5.0, 6.0 and 16.0 GT/s per-lane
+  in both Root Complex (RC) and End Point (EP) modes, depending on the
+  chosen port.
+  The Digital PHY (PHYD) part adheres to the Intel PIPE (PHY Interface
+  for the PCIe) specification.
+
+properties:
+  compatible:
+    const: mediatek,mt8196-pcie-sphy
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: sif
+      - const: ckm
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cells:
+    items:
+      - description: Internal resistor selection of TX Bias Current
+      - description: XTP Bias V2V voltage calibration
+      - description: S-PLL CKTX Impedance Selection (P-MOSFET side)
+      - description: S-PLL CKTX Impedance Selection (N-MOSFET side)
+      - description: S-PLL CKTX Intermediate Transition Impedance
+      - description: RX Front-End Return Loss Continuous Time Linear EQ
+      - description: RX Front-End Return Loss Variable Gain Amplifier
+      - description: RX Front-End Return Loss Decision Feedback EQ
+      - description: RX Impedance Selection
+      - description: TX Impedance Selection (P-MOSFET side)
+      - description: TX Impedance Selection (N-MOSFET side)
+      - description: TX Lane 0 Switch Resistance (RSWn)
+      - description: TX Lane 1 Switch Resistance (RSWn)
+      - description: eFuse calibration table version
+
+  nvmem-cell-names:
+    items:
+      - const: int-r
+      - const: xtp-vtrim
+      - const: cktx-pmos
+      - const: cktx-nmos
+      - const: cktx-r-mid
+      - const: rxfe-lanes-rl-ctle
+      - const: rxfe-lanes-rl-vga
+      - const: rxfe-lanes-rl-dfe
+      - const: rx-lanes-imp
+      - const: tx-lanes-pmos
+      - const: tx-lanes-nmos
+      - const: tx-ln0-rswn
+      - const: tx-ln1-rswn
+      - const: cal-version
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@16900000 {
+        compatible = "mediatek,mt8196-pcie-sphy";
+        reg = <0x16900000 0x10000>, <0x16920000 0x10000>;
+        reg-names = "sif", "ckm";
+        power-domains = <&spm 10>;
+        #phy-cells = <0>;
+    };
-- 
2.54.0