[PATCH v4 07/11] Bluetooth: hci_qca: Embed bt_power in struct qca_serdev
From: Loic Poulain
Date: Thu Jul 16 2026 - 12:22:30 EST
'bt_power' is allocated dynamically only for a subset of SOC types, using a
switch on the SOC type that mirrors the one that follows it. This is about
to become pointless as the power sequencer path (used by M.2 modules) is
independent of the SOC type and needs 'bt_power' populated for any type.
Embed 'struct qca_power' directly in 'struct qca_serdev' instead of
allocating it separately. This drops the extra allocation and its dedicated
SOC-type switch, and removes the need for NULL checks on the pointer.
No functional change intended.
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxxxxxxxx>
---
drivers/bluetooth/hci_qca.c | 72 ++++++++++++++++-----------------------------
1 file changed, 26 insertions(+), 46 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 41e8c302abc2a820022d1783f1fad76b358ae67c..25c4387136245fca25e375951f960d7240116781 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -226,7 +226,7 @@ struct qca_serdev {
struct gpio_desc *sw_ctrl;
struct clk *susclk;
enum qca_btsoc_type btsoc_type;
- struct qca_power *bt_power;
+ struct qca_power bt_power;
u32 init_speed;
u32 oper_speed;
bool bdaddr_property_broken;
@@ -1776,7 +1776,7 @@ static int qca_regulator_init(struct hci_uart *hu)
*/
qcadev = serdev_device_get_drvdata(hu->serdev);
- if (!qcadev->bt_power->vregs_on) {
+ if (!qcadev->bt_power.vregs_on) {
serdev_device_close(hu->serdev);
ret = qca_regulator_enable(qcadev);
if (ret)
@@ -2242,7 +2242,7 @@ static void qca_power_off(struct hci_uart *hu)
return;
qcadev = serdev_device_get_drvdata(hu->serdev);
- power = qcadev->bt_power;
+ power = &qcadev->bt_power;
switch (soc_type) {
case QCA_WCN3988:
@@ -2256,7 +2256,7 @@ static void qca_power_off(struct hci_uart *hu)
break;
}
- if (power && power->pwrseq) {
+ if (power->pwrseq) {
pwrseq_power_off(power->pwrseq);
set_bit(QCA_BT_OFF, &qca->flags);
return;
@@ -2313,7 +2313,7 @@ static int qca_hci_shutdown(struct hci_dev *hdev)
static int qca_regulator_enable(struct qca_serdev *qcadev)
{
- struct qca_power *power = qcadev->bt_power;
+ struct qca_power *power = &qcadev->bt_power;
int ret;
if (power->pwrseq)
@@ -2345,7 +2345,7 @@ static void qca_regulator_disable(struct qca_serdev *qcadev)
if (!qcadev)
return;
- power = qcadev->bt_power;
+ power = &qcadev->bt_power;
/* Already disabled? */
if (!power->vregs_on)
@@ -2417,26 +2417,6 @@ static int qca_serdev_probe(struct serdev_device *serdev)
else
qcadev->btsoc_type = QCA_ROME;
- switch (qcadev->btsoc_type) {
- case QCA_QCA6390:
- case QCA_WCN3950:
- case QCA_WCN3988:
- case QCA_WCN3990:
- case QCA_WCN3991:
- case QCA_WCN3998:
- case QCA_WCN6750:
- case QCA_WCN6855:
- case QCA_WCN7850:
- qcadev->bt_power = devm_kzalloc(&serdev->dev,
- sizeof(struct qca_power),
- GFP_KERNEL);
- if (!qcadev->bt_power)
- return -ENOMEM;
- break;
- default:
- break;
- }
-
switch (qcadev->btsoc_type) {
case QCA_WCN3950:
case QCA_WCN3988:
@@ -2451,10 +2431,10 @@ static int qca_serdev_probe(struct serdev_device *serdev)
* the M.2 Key E connector.
*/
if (of_graph_is_present(dev_of_node(&serdev->ctrl->dev))) {
- qcadev->bt_power->pwrseq = devm_pwrseq_get(&serdev->ctrl->dev,
- "uart");
- if (IS_ERR(qcadev->bt_power->pwrseq))
- return PTR_ERR(qcadev->bt_power->pwrseq);
+ qcadev->bt_power.pwrseq = devm_pwrseq_get(&serdev->ctrl->dev,
+ "uart");
+ if (IS_ERR(qcadev->bt_power.pwrseq))
+ return PTR_ERR(qcadev->bt_power.pwrseq);
break;
}
@@ -2465,8 +2445,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
* let's use the power sequencer. Otherwise, let's
* drive everything ourselves.
*/
- qcadev->bt_power->pwrseq = devm_pwrseq_get(&serdev->dev,
- "bluetooth");
+ qcadev->bt_power.pwrseq = devm_pwrseq_get(&serdev->dev,
+ "bluetooth");
/*
* Some modules have BT_EN enabled via a hardware pull-up,
@@ -2474,21 +2454,21 @@ static int qca_serdev_probe(struct serdev_device *serdev)
* through the power sequence. In such cases, fall through
* to follow the legacy flow.
*/
- if (IS_ERR(qcadev->bt_power->pwrseq))
- qcadev->bt_power->pwrseq = NULL;
+ if (IS_ERR(qcadev->bt_power.pwrseq))
+ qcadev->bt_power.pwrseq = NULL;
else
break;
}
- qcadev->bt_power->dev = &serdev->dev;
- err = qca_init_regulators(qcadev->bt_power, data->vregs,
+ qcadev->bt_power.dev = &serdev->dev;
+ err = qca_init_regulators(&qcadev->bt_power, data->vregs,
data->num_vregs);
if (err) {
BT_ERR("Failed to init regulators:%d", err);
return err;
}
- qcadev->bt_power->vregs_on = false;
+ qcadev->bt_power.vregs_on = false;
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
@@ -2522,10 +2502,10 @@ static int qca_serdev_probe(struct serdev_device *serdev)
case QCA_QCA6390:
if (dev_of_node(&serdev->dev)) {
- qcadev->bt_power->pwrseq = devm_pwrseq_get(&serdev->dev,
- "bluetooth");
- if (IS_ERR(qcadev->bt_power->pwrseq))
- return PTR_ERR(qcadev->bt_power->pwrseq);
+ qcadev->bt_power.pwrseq = devm_pwrseq_get(&serdev->dev,
+ "bluetooth");
+ if (IS_ERR(qcadev->bt_power.pwrseq))
+ return PTR_ERR(qcadev->bt_power.pwrseq);
break;
}
fallthrough;
@@ -2549,14 +2529,14 @@ static int qca_serdev_probe(struct serdev_device *serdev)
}
}
- if (qcadev->bt_power->pwrseq) {
- bt_en_available = pwrseq_is_controllable(qcadev->bt_power->pwrseq);
+ if (qcadev->bt_power.pwrseq) {
+ bt_en_available = pwrseq_is_controllable(qcadev->bt_power.pwrseq);
if (!bt_en_available) {
/* The host cannot gate the BT power individually.
* Treat it as always-on and drop the pwrseq handle.
*/
- pwrseq_power_on(qcadev->bt_power->pwrseq);
- qcadev->bt_power->pwrseq = NULL;
+ pwrseq_power_on(qcadev->bt_power.pwrseq);
+ qcadev->bt_power.pwrseq = NULL;
}
}
@@ -2594,7 +2574,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
static void qca_serdev_remove(struct serdev_device *serdev)
{
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
- struct qca_power *power = qcadev->bt_power;
+ struct qca_power *power = &qcadev->bt_power;
switch (qcadev->btsoc_type) {
case QCA_WCN3988:
--
2.34.1