Re: [PATCH v4 2/4] clk: en7523: add support for dedicated PCIe PERSTOUT reset

[Brian Masney]

Hi Christian,

On Tue, Jul 14, 2026 at 01:58:44PM +0200, Christian Marangi wrote:
> Add support for resetting the PCIe lines with the PERSTOUT reset. These
> special reset are controlled by the PCIC register and are specific to each
> of the 3 PCIe lines.
> 
> Notice that reset logic is inverted for these bit where 0 is assert and 1
> deassert. This is intenrally handled in the reset function.

s/intenrally/internally/

The "these bit" above is awkward as well. Sorry I don't have a
suggestion offhand, but I see what you mean below based on the code.

> 
> PCI enable/disable are updated to drop PERSTOUT bits in favor dedicated
> reset handling.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
>  drivers/clk/clk-en7523.c | 39 ++++++++++++++++++++++++++++-----------
>  1 file changed, 28 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> index 1ab0e2eca5d3..c9b21d9bf2f3 100644
> --- a/drivers/clk/clk-en7523.c
> +++ b/drivers/clk/clk-en7523.c
> @@ -338,6 +338,7 @@ static const struct en_clk_desc en7581_base_clks[] = {
>  static const u16 en7581_rst_ofs[] = {
>  	REG_RST_CTRL2,
>  	REG_RST_CTRL1,
> +	REG_NP_SCU_PCIC,
>  };
>  
>  static const u16 en751221_rst_ofs[] = {
> @@ -450,6 +451,11 @@ static const u16 en7581_rst_map[] = {
>  	[EN7581_CPU_TIMER_RST]		= RST_NR_PER_BANK + 28,
>  	[EN7581_PCIE_HB_RST]		= RST_NR_PER_BANK + 29,
>  	[EN7581_XPON_MAC_RST]		= RST_NR_PER_BANK + 31,
> +
> +	/* RST_PCIC */
> +	[EN7581_PCIC_PERSTOUT0_RST]	= 2 * RST_NR_PER_BANK + 29,
> +	[EN7581_PCIC_PERSTOUT1_RST]	= 2 * RST_NR_PER_BANK + 26,
> +	[EN7581_PCIC_PERSTOUT2_RST]	= 2 * RST_NR_PER_BANK + 16,
>  };
>  
>  static const u16 en751221_rst_map[] = {
> @@ -635,9 +641,7 @@ static int en7581_pci_enable(struct clk_hw *hw)
>  	void __iomem *np_base = cg->base;
>  	u32 val, mask;
>  
> -	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1 |
> -	       REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT2 |
> -	       REG_PCI_CONTROL_PERSTOUT;
> +	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
>  	val = readl(np_base + REG_PCI_CONTROL);
>  	writel(val | mask, np_base + REG_PCI_CONTROL);
>  
> @@ -650,9 +654,7 @@ static void en7581_pci_disable(struct clk_hw *hw)
>  	void __iomem *np_base = cg->base;
>  	u32 val, mask;
>  
> -	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1 |
> -	       REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT2 |
> -	       REG_PCI_CONTROL_PERSTOUT;
> +	mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
>  	val = readl(np_base + REG_PCI_CONTROL);
>  	writel(val & ~mask, np_base + REG_PCI_CONTROL);
>  	usleep_range(1000, 2000);
> @@ -754,14 +756,21 @@ static int en7523_reset_update(struct reset_controller_dev *rcdev,
>  			       unsigned long id, bool assert)
>  {
>  	struct en_rst_data *rst_data = container_of(rcdev, struct en_rst_data, rcdev);
> -	void __iomem *addr = rst_data->base + rst_data->bank_ofs[id / RST_NR_PER_BANK];
> +	u32 offset = rst_data->bank_ofs[id / RST_NR_PER_BANK];
> +	void __iomem *addr = rst_data->base + offset;
> +	bool inverted = false;
>  	u32 val;
>  
> +	/* For PCIC reset logic is inverted, 0:assert 1:deassert*/

Add space before end of comment.

> +	if (offset == REG_NP_SCU_PCIC)
> +		inverted = true;
> +
>  	val = readl(addr);
> +	val &= ~BIT(id % RST_NR_PER_BANK);
>  	if (assert)
> -		val |= BIT(id % RST_NR_PER_BANK);
> +		val |= inverted ? 0 : BIT(id % RST_NR_PER_BANK);
>  	else
> -		val &= ~BIT(id % RST_NR_PER_BANK);
> +		val |= inverted ? BIT(id % RST_NR_PER_BANK) : 0;

Could you do:

    if (assert ^ inverted)

Then keep the existing logic for val inside the if/else?



>  	writel(val, addr);
>  
>  	return 0;
> @@ -783,9 +792,17 @@ static int en7523_reset_status(struct reset_controller_dev *rcdev,
>  			       unsigned long id)
>  {
>  	struct en_rst_data *rst_data = container_of(rcdev, struct en_rst_data, rcdev);
> -	void __iomem *addr = rst_data->base + rst_data->bank_ofs[id / RST_NR_PER_BANK];
> +	u32 offset = rst_data->bank_ofs[id / RST_NR_PER_BANK];
> +	void __iomem *addr = rst_data->base + offset;
> +	bool inverted = false;
> +	u32 val;
> +
> +	/* For PCIC reset logic is inverted, 0:assert 1:deassert*/

Add space before */

Brian