[PATCH 4/4] arm64: dts: qcom: Add Glymur QCB
From: Gopikrishna Garmidi
Date: Fri Jul 17 2026 - 07:55:32 EST
The Glymur QCB (Qualcomm Compute Board) is a Glymur-based board in an
open form factor, aimed at compute bring-up and power/signal measurement
rather than the closed enclosure of the CRD.
Add its device tree. The board boots to a shell over the uart21 console
with its root filesystem on NVMe. Enabled so far:
- Board and sleep clocks
- Volume up/down keys
- PMIC RPMH regulators (banks 0 - 4) and the NVMe, WWAN and WCN rails
- PCIe4/5/6 controllers and PHYs, with their PERST/WAKE/CLKREQ lines
- WCN7850 WiFi on PCIe4 and Bluetooth on UART14
- Embedded controller on I2C9
- ADSP,CDSP and SoCCP remote processors
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/glymur-qcb.dts | 679 ++++++++++++++++++++++++++++++++
2 files changed, 680 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index e05414290d8e..96fca1e11bf8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += eliza-cqs-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += eliza-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += glymur-qcb.dtb
dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk.dtb
hamoa-iot-evk-el2-dtbs := hamoa-iot-evk.dtb x1-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/glymur-qcb.dts b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
new file mode 100644
index 000000000000..592357de7fb6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/glymur-qcb.dts
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include "glymur.dtsi"
+
+#include "pmcx0102.dtsi" /* SPMI0: SID-2/3 SPMI1: SID-2/3 */
+#include "pmh0101.dtsi" /* SPMI0: SID-1 */
+#include "pmh0110-glymur.dtsi" /* SPMI0: SID-5/7 SPMI1: SID-5 */
+#include "pmh0104-glymur.dtsi" /* SPMI0: SID-8/9 SPMI1: SID-11 */
+#include "pmk8850.dtsi" /* SPMI0: SID-0 */
+#include "smb2370.dtsi" /* SPMI2: SID-9/10/11 */
+
+/ {
+ model = "Qualcomm Technologies, Inc. Glymur QCB";
+ compatible = "qcom,glymur-qcb", "qcom,glymur";
+
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ i2c0 = &i2c0;
+ i2c1 = &i2c4;
+ i2c2 = &i2c5;
+ i2c3 = &i2c9;
+ spi0 = &spi18;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ clock-frequency = <38400000>;
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_vol_up_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pmh0101_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmh0101_gpios 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_wwan: regulator-wwan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WWAN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 246 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wwan_reg_en>;
+ pinctrl-names = "default";
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b_e0_1p8>;
+ vddaon-supply = <&vreg_l15b_e0_1p8>;
+ vdddig-supply = <&vreg_l15b_e0_1p8>;
+ vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
+ vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmh0101-rpmh-regulators";
+ qcom,pmic-id = "B_E0";
+
+ vreg_bob1_e0: bob1 {
+ regulator-name = "vreg_bob1_e0";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <4224000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_bob2_e0: bob2 {
+ regulator-name = "vreg_bob2_e0";
+ regulator-min-microvolt = <2540000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_l1b_e0_1p8: ldo1 {
+ regulator-name = "vreg_l1b_e0_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_e0_2p9: ldo2 {
+ regulator-name = "vreg_l2b_e0_2p9";
+ regulator-min-microvolt = <2904000>;
+ regulator-max-microvolt = <2904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_e0_2p79: ldo7 {
+ regulator-name = "vreg_l7b_e0_2p79";
+ regulator-min-microvolt = <2790000>;
+ regulator-max-microvolt = <2792000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_e0_1p50: ldo8 {
+ regulator-name = "vreg_l8b_e0_1p50";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_e0_2p7: ldo9 {
+ regulator-name = "vreg_l9b_e0_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_e0_1p8: ldo10 {
+ regulator-name = "vreg_l10b_e0_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_e0_1p2: ldo11 {
+ regulator-name = "vreg_l11b_e0_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_e0_1p14: ldo12 {
+ regulator-name = "vreg_l12b_e0_1p14";
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_e0_1p8: ldo15 {
+ regulator-name = "vreg_l15b_e0_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_e0_2p4: ldo17 {
+ regulator-name = "vreg_l17b_e0_2p4";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_e0_1p2: ldo18 {
+ regulator-name = "vreg_l18b_e0_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmcx0102-rpmh-regulators";
+ qcom,pmic-id = "C_E1";
+
+ vreg_l1c_e1_0p82: ldo1 {
+ regulator-name = "vreg_l1c_e1_0p82";
+ regulator-min-microvolt = <832000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_e1_1p14: ldo2 {
+ regulator-name = "vreg_l2c_e1_1p14";
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_e1_0p89: ldo3 {
+ regulator-name = "vreg_l3c_e1_0p89";
+ regulator-min-microvolt = <890000>;
+ regulator-max-microvolt = <980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_e1_0p72: ldo4 {
+ regulator-name = "vreg_l4c_e1_0p72";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <720000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmh0110-rpmh-regulators";
+ qcom,pmic-id = "F_E0";
+
+ vreg_s7f_e0_1p32: smps7 {
+ regulator-name = "vreg_s7f_e0_1p32";
+ regulator-min-microvolt = <1320000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s8f_e0_0p95: smps8 {
+ regulator-name = "vreg_s8f_e0_0p95";
+ regulator-min-microvolt = <952000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9f_e0_1p9: smps9 {
+ regulator-name = "vreg_s9f_e0_1p9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_e0_0p82: ldo2 {
+ regulator-name = "vreg_l2f_e0_0p82";
+ regulator-min-microvolt = <832000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_e0_0p72: ldo3 {
+ regulator-name = "vreg_l3f_e0_0p72";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <720000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4f_e0_1p08: ldo4 {
+ regulator-name = "vreg_l4f_e0_1p08";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmh0110-rpmh-regulators";
+ qcom,pmic-id = "F_E1";
+
+ vreg_s7f_e1_0p3: smps7 {
+ regulator-name = "vreg_s7f_e1_0p3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_e1_0p82: ldo1 {
+ regulator-name = "vreg_l1f_e1_0p82";
+ regulator-min-microvolt = <832000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_e1_0p83: ldo2 {
+ regulator-name = "vreg_l2f_e1_0p83";
+ regulator-min-microvolt = <832000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4f_e1_1p08: ldo4 {
+ regulator-name = "vreg_l4f_e1_1p08";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmh0110-rpmh-regulators";
+ qcom,pmic-id = "H_E0";
+
+ vreg_l1h_e0_0p89: ldo1 {
+ regulator-name = "vreg_l1h_e0_0p89";
+ regulator-min-microvolt = <832000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2h_e0_0p72: ldo2 {
+ regulator-name = "vreg_l2h_e0_0p72";
+ regulator-min-microvolt = <832000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3h_e0_0p32: ldo3 {
+ regulator-name = "vreg_l3h_e0_0p32";
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4h_e0_1p2: ldo4 {
+ regulator-name = "vreg_l4h_e0_1p2";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&i2c9 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ embedded-controller@76 {
+ compatible = "qcom,glymur-qcb-ec", "qcom,hamoa-crd-ec";
+ reg = <0x76>;
+
+ interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&ec_int_n_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&pcie4 {
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l1c_e1_0p82>;
+ vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+
+ status = "okay";
+};
+
+&pcie4_port0 {
+ reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pcie5 {
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie5_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie5_phy {
+ vdda-phy-supply = <&vreg_l2f_e0_0p82>;
+ vdda-pll-supply = <&vreg_l4h_e0_1p2>;
+
+ status = "okay";
+};
+
+&pcie5_port0 {
+ reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+};
+
+&pcie6 {
+ vddpe-3v3-supply = <&vreg_wwan>;
+
+ pinctrl-0 = <&pcie6_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6_phy {
+ vdda-phy-supply = <&vreg_l1c_e1_0p82>;
+ vdda-pll-supply = <&vreg_l4f_e1_1p08>;
+
+ status = "okay";
+};
+
+&pcie6_port0 {
+ reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+};
+
+&pmh0101_gpios {
+ key_vol_up_default: key-vol-up-default-state {
+ pins = "gpio6";
+ function = "normal";
+ output-disable;
+ bias-pull-up;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio14";
+ function = "normal";
+ bias-disable;
+ };
+};
+
+&pmk8850_rtc {
+ qcom,no-alarm;
+ qcom,uefi-rtc-info;
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/glymur/adsp.mbn",
+ "qcom/glymur/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/glymur/cdsp.mbn",
+ "qcom/glymur/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_soccp {
+ firmware-name = "qcom/glymur/soccp.mbn",
+ "qcom/glymur/soccp_dtb.mbn";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */
+ <10 2>, /* OOB UART */
+ <44 4>; /* Security SPI (TPM) */
+
+ ec_int_n_default: ec-int-n-state {
+ pins = "gpio66";
+ function = "gpio";
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie5_default: pcie5-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie5_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6_default: pcie6-default-state {
+ clkreq-n-pins {
+ pins = "gpio150";
+ function = "pcie6_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio149";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio151";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+ pins = "gpio116", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wwan_reg_en: wwan-reg-en-state {
+ pins = "gpio246";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
+};
--
2.34.1