[PATCH v3 03/11] arm64: dts: lx2160a: extract the SerDes nodes into a separate dtsi

[Ioana Ciornei]

In terms of its SerDes blocks, the LX2162A is not properly described
since it just inherits the LX2160A SerDes nodes, which is not correct.
In order to fix this but also avoid the usage of delete-node, we need to
first extract the SerDes nodes currently found in fsl-lx2160a.dtsi into a
separate dtsi.

This patch does not intend to do any actual changes in the final dtb
files, only a dt node move.

Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v3:
- New patch
---
 .../dts/freescale/fsl-lx2160a-serdes.dtsi     | 21 +++++++++++++++++++
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 14 +------------
 2 files changed, 22 insertions(+), 13 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi
new file mode 100644
index 000000000000..307824eda6d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-serdes.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file describing the Lynx 28G SerDes blocks found on the LX2160A
+// Rev1 and Rev2
+//
+// Copyright 2026 NXP
+
+&soc {
+	serdes_1: phy@1ea0000 {
+		compatible = "fsl,lynx-28g";
+		reg = <0x0 0x1ea0000 0x0 0x1e30>;
+		#phy-cells = <1>;
+	};
+
+	serdes_2: phy@1eb0000 {
+		compatible = "fsl,lynx-28g";
+		reg = <0x0 0x1eb0000 0x0 0x1e30>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 387cd677cdc7..da139e7fa30c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -621,19 +621,6 @@ soc: soc {
 		ranges;
 		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
 
-		serdes_1: phy@1ea0000 {
-			compatible = "fsl,lynx-28g";
-			reg = <0x0 0x1ea0000 0x0 0x1e30>;
-			#phy-cells = <1>;
-		};
-
-		serdes_2: phy@1eb0000 {
-			compatible = "fsl,lynx-28g";
-			reg = <0x0 0x1eb0000 0x0 0x1e30>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
 		crypto: crypto@8000000 {
 			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
 			fsl,sec-era = <10>;
@@ -1855,3 +1842,4 @@ optee: optee {
 };
 
 #include "fsl-lx2160a-pcie-mbvl.dtsi"
+#include "fsl-lx2160a-serdes.dtsi"
-- 
2.25.1