[PATCH v2 2/3] arm64: dts: qcom: kodiak: Add camera mclk pinctrl definitions

[Luca Weiss]

On different boards the cameras are connected to different pins with the
cam_mclk function. Add the definitions so that mclk0-5 are covered.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kodiak.dtsi | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index d5fc38fc10ed..13f1c205c07e 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -6521,6 +6521,27 @@ qup_uart15_rx: qup-uart15-rx-state {
 				function = "qup17";
 			};
 
+			cam_mclk0_default: cam-mclk0-default-state {
+				pins = "gpio64";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk1_default: cam-mclk1-default-state {
+				pins = "gpio65";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk2_default: cam-mclk2-default-state {
+				pins = "gpio66";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cam_mclk3_default: cam-mclk3-default-state {
 				pins = "gpio67";
 				function = "cam_mclk";
@@ -6528,6 +6549,13 @@ cam_mclk3_default: cam-mclk3-default-state {
 				bias-disable;
 			};
 
+			cam_mclk4_default: cam-mclk4-default-state {
+				pins = "gpio68";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cci0_default: cci0-default-state {
 				pins = "gpio69", "gpio70";
 				function = "cci_i2c";
@@ -6594,6 +6622,13 @@ pcie0_clkreq_n: pcie0-clkreq-n-state {
 				function = "pcie0_clkreqn";
 			};
 
+			cam_mclk5_default: cam-mclk5-default-state {
+				pins = "gpio93";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			mi2s0_mclk: mi2s0-mclk-state {
 				pins = "gpio96";
 				function = "pri_mi2s";

-- 
2.55.0