Re: [PATCH v3 1/5] drm/bridge: Implement generic USB Type-C DP HPD bridge

[Sebastian Reichel]

Hello,

On Fri, Jul 17, 2026 at 03:23:19PM +0800, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@xxxxxxxxxxxxxx>
> 
> The HPD function of Type-C DP is implemented through
> drm_connector_oob_hotplug_event(). For embedded DP, it is required
> that the DRM connector fwnode corresponds to the Type-C port fwnode.
> 
> To describe the relationship between the DP controller and the Type-C
> port device, we usually using drm_bridge to build a bridge chain.
> 
> Now several USB-C controller drivers have already implemented the DP
> HPD bridge function provided by aux-hpd-bridge.c, it will build a DP
> HPD bridge on USB-C connector port device.
> 
> But this requires the USB-C controller driver to manually register the
> HPD bridge. If the driver does not implement this feature, the bridge
> will not be create.
> 
> So this patch implements a generic DP HPD bridge based on
> aux-hpd-bridge.c. It will monitor Type-C bus events, and when a
> Type-C port device containing the DP svid is registered, it will
> create an HPD bridge for it without the need for the USB-C controller
> driver to implement it.
> 
> Signed-off-by: Chaoyi Chen <chaoyi.chen@xxxxxxxxxxxxxx>
> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@xxxxxxxxxxxxx>
> ---

Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
Tested-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> # ArmSom Sige5

I gave this a test together with the RK3588/RK3576 USB-C DP AltMode
patches I'm working on. As the fusb302 does a manual registration
for the DRM bridge in its probe function, the bridge is registered
twice:

root@sige5 # cat /sys/kernel/debug/dri/bridges
...
bridge[1]: drm_aux_hpd_bridge_funcs
	refcount: 4
	type: [10] DP
	OF: /soc/i2c@2ac50000/typec-portc@22/connector:usb-c-connector
	ops: [0x4] hpd
bridge[2]: drm_aux_hpd_bridge_funcs
	refcount: 2
	type: [10] DP
	OF: /soc/i2c@2ac50000/typec-portc@22/connector:usb-c-connector
	ops: [0x4] hpd
...

Apparently the USB-C DP AltMode keeps working, so this just wastes
a few CPU cycles and some memory. So this can land and then we can
remove the manual code from the driver as a follow-up step. I also
gave that a try and things keep working. I won't send the fusb302
patch for now to ensure its not applied before this patch lands.

Greetings,

-- Sebastian

> (no changes since v3)
> 
> Changes in v2:
> - Add copyright text.
> - Remove useless goto.
> 
> ---
>  drivers/gpu/drm/bridge/Kconfig                | 10 ++++
>  drivers/gpu/drm/bridge/Makefile               |  1 +
>  .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  | 54 +++++++++++++++++++
>  3 files changed, 65 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> 
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 4a57d49b4c6d..9739b2a19758 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -30,6 +30,16 @@ config DRM_AUX_HPD_BRIDGE
>  	  Simple bridge that terminates the bridge chain and provides HPD
>  	  support.
>  
> +if DRM_AUX_HPD_BRIDGE
> +config DRM_AUX_HPD_TYPEC_BRIDGE
> +	tristate
> +	depends on TYPEC || !TYPEC
> +	default TYPEC
> +	help
> +	  Simple bridge that terminates the bridge chain and provides HPD
> +	  support. It build bridge on each USB-C connector device node.
> +endif
> +
>  menu "Display Interface Bridges"
>  	depends on DRM && DRM_BRIDGE
>  
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 15cc821d85b7..d88a9e1ccc9a 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_DRM_AUX_BRIDGE) += aux-bridge.o
>  obj-$(CONFIG_DRM_AUX_HPD_BRIDGE) += aux-hpd-bridge.o
> +obj-$(CONFIG_DRM_AUX_HPD_TYPEC_BRIDGE) += aux-hpd-typec-dp-bridge.o
>  obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
>  obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
>  obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
> diff --git a/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> new file mode 100644
> index 000000000000..c09579ff7ab9
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> @@ -0,0 +1,54 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2026 Rockchip Electronics Co., Ltd.
> + *
> + * Author: Chaoyi Chen <chaoyi.chen@xxxxxxxxxxxxxx>
> + */
> +#include <linux/of.h>
> +#include <linux/usb/typec_altmode.h>
> +#include <linux/usb/typec_dp.h>
> +
> +#include <drm/bridge/aux-bridge.h>
> +
> +static int drm_typec_bus_event(struct notifier_block *nb,
> +			       unsigned long action, void *data)
> +{
> +	struct device *dev = (struct device *)data;
> +	struct typec_altmode *alt = to_typec_altmode(dev);
> +
> +	if (action != BUS_NOTIFY_ADD_DEVICE)
> +		return NOTIFY_OK;
> +
> +	/*
> +	 * alt->dev.parent->parent : USB-C controller device
> +	 * alt->dev.parent         : USB-C connector device
> +	 */
> +	if (is_typec_port_altmode(&alt->dev) && alt->svid == USB_TYPEC_DP_SID)
> +		drm_dp_hpd_bridge_register(alt->dev.parent->parent,
> +					   to_of_node(alt->dev.parent->fwnode));
> +
> +	return NOTIFY_OK;
> +}
> +
> +static struct notifier_block drm_typec_event_nb = {
> +	.notifier_call = drm_typec_bus_event,
> +};
> +
> +static void drm_aux_hpd_typec_dp_bridge_module_exit(void)
> +{
> +	bus_unregister_notifier(&typec_bus, &drm_typec_event_nb);
> +}
> +
> +static int __init drm_aux_hpd_typec_dp_bridge_module_init(void)
> +{
> +	bus_register_notifier(&typec_bus, &drm_typec_event_nb);
> +
> +	return 0;
> +}
> +
> +module_init(drm_aux_hpd_typec_dp_bridge_module_init);
> +module_exit(drm_aux_hpd_typec_dp_bridge_module_exit);
> +
> +MODULE_AUTHOR("Chaoyi Chen <chaoyi.chen@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("DRM TYPEC DP HPD BRIDGE");
> +MODULE_LICENSE("GPL");
> -- 
> 2.53.0
>

Attachment: signature.asc
Description: PGP signature