[PATCH v2 0/3] mtd: rawnand: sunxi: fix H6/H616 controller timings

[James Hilliard]

The sunxi NAND timing solver currently applies the original A10 NDFC
timing characteristics to every supported controller. The H6/H616 NDFC
uses two internal cycles for several setup and hold intervals and has
different delay-field encodings, so the resulting clock and timing
register values do not match the hardware.

Prepare for per-controller timing data in two behaviorally focused
patches, then add and select the H616 characteristics in the final fix.
Legacy controllers retain their existing setup-cycle behavior and delay
encodings.

Tested on an H616 board with Toshiba TC58NVG1S3H NAND.

Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
---
Changes v1 -> v2:
  - Split legacy timing setup from the H616 fix  (suggested by Miquel)
  - Move tADL/tWHR encodings to a separate patch  (suggested by Miquel)
  - Keep the timing lookup helper unchanged  (suggested by Miquel)
  - Drop the minimum-period helper  (suggested by Miquel)
  - Align H616 timing-data and capability names  (suggested by Miquel)
  - Add Cc: stable to all three patches  (suggested by Miquel)

---
James Hilliard (3):
      mtd: rawnand: sunxi: group controller delay tables
      mtd: rawnand: sunxi: describe tADL and tWHR delays
      mtd: rawnand: sunxi: fix H6/H616 controller timings

 drivers/mtd/nand/raw/sunxi_nand.c | 119 +++++++++++++++++++++++++++-----------
 1 file changed, 86 insertions(+), 33 deletions(-)
---
base-commit: 6f5156d7a31a8c3b0f34af4675c9299c8f877cbe
change-id: 20260717-submit-sunxi-nand-h6-h616-timings-794a2994267d

Best regards,
--  
James Hilliard <james.hilliard1@xxxxxxxxx>