[PATCH v5 4/9] dmaengine: dw-edma: Complete descriptors before pausing

[Koichiro Den]

If PAUSE is requested while the final burst of a descriptor is in
flight, the DONE interrupt takes the PAUSE path without checking whether
the descriptor has been depleted. The depleted descriptor remains on the
issued list and the channel enters EDMA_ST_PAUSE.

On resume, dw_edma_start_transfer() can select that depleted descriptor
again even though no burst remains, leaving the channel in an invalid
busy state.

Check for descriptor completion before acknowledging PAUSE. If there is
no work to start on resume, leave the channel idle. Also ignore DONE
interrupts while the channel is paused so a stale or repeated interrupt
cannot change its state or start queued work.

Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
Signed-off-by: Koichiro Den <den@xxxxxxxxxxxxx>
---
Changes in v5:
  - Updated the commit message for the flattened descriptor
    representation in dmaengine/next.

 drivers/dma/dw-edma/dw-edma-core.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index c0d9f7e373f3..7a567f924538 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -255,7 +255,8 @@ static int dw_edma_device_resume(struct dma_chan *dchan)
 		err = -EPERM;
 	} else {
 		chan->status = EDMA_ST_BUSY;
-		dw_edma_start_transfer(chan);
+		if (!dw_edma_start_transfer(chan))
+			chan->status = EDMA_ST_IDLE;
 	}
 
 	return err;
@@ -601,10 +602,16 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
 	unsigned long flags;
 
 	spin_lock_irqsave(&chan->vc.lock, flags);
+	if (chan->status == EDMA_ST_PAUSE) {
+		spin_unlock_irqrestore(&chan->vc.lock, flags);
+		return;
+	}
+
 	vd = vchan_next_desc(&chan->vc);
 	if (vd) {
 		switch (chan->request) {
 		case EDMA_REQ_NONE:
+		case EDMA_REQ_PAUSE:
 			desc = vd2dw_edma_desc(vd);
 			if (desc->start_burst >= desc->nburst) {
 				dw_hdma_set_callback_result(vd,
@@ -613,6 +620,12 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
 				vchan_cookie_complete(vd);
 			}
 
+			if (chan->request == EDMA_REQ_PAUSE) {
+				chan->request = EDMA_REQ_NONE;
+				chan->status = EDMA_ST_PAUSE;
+				break;
+			}
+
 			/* Continue transferring if there are remaining chunks or issued requests.
 			 */
 			chan->status = dw_edma_start_transfer(chan) ? EDMA_ST_BUSY : EDMA_ST_IDLE;
@@ -624,11 +637,6 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
 			chan->status = EDMA_ST_IDLE;
 			break;
 
-		case EDMA_REQ_PAUSE:
-			chan->request = EDMA_REQ_NONE;
-			chan->status = EDMA_ST_PAUSE;
-			break;
-
 		default:
 			break;
 		}
-- 
2.51.0