[PATCH v2 8/9] arm64: dts: qcom: eliza: Add GPU cooling

[Akhil P Oommen]

From: Gaurav Kohli <gaurav.kohli@xxxxxxxxxxxxxxxx>

Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures. Set up GPU cooling by throttling the GPU speed
when it reaches 95°C.

Signed-off-by: Gaurav Kohli <gaurav.kohli@xxxxxxxxxxxxxxxx>
Signed-off-by: Akhil P Oommen <akhilpo@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/eliza.dtsi | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
index c24c5e9695d5..7a6095495b5a 100644
--- a/arch/arm64/boot/dts/qcom/eliza.dtsi
+++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
@@ -22,6 +22,7 @@
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -4203,7 +4204,7 @@ gpuss0-thermal {
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
-				gpu-alert {
+				gpuss0_alert0: gpu-alert {
 					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
@@ -4221,6 +4222,13 @@ gpu-critical {
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpuss1-thermal {
@@ -4229,7 +4237,7 @@ gpuss1-thermal {
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
-				gpu-alert {
+				gpuss1_alert0: gpu-alert {
 					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
@@ -4247,6 +4255,13 @@ gpu-critical {
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		modem0-thermal {

-- 
2.54.0