[PATCH v2 2/2] staging: sm750fb: unindent defines left by conditional removal
From: Nils Lehnen
Date: Sat Jul 18 2026 - 02:21:39 EST
The preceding removal of the VALIDATION_CHIP conditionals left the
surviving define blocks and one comment indented by four spaces, and
two double blank lines where conditional lines went away. Move the
now-unconditional defines to column zero while keeping the aligned
value column untouched, and collapse the blank lines.
No functional change: whitespace and preprocessor layout only; the
disassembly of all ten sm750fb object files stays bit-identical.
All English text in this patch (commit message and code comments) was
translated from a German draft with the assistance of Claude Fable 5.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Nils Lehnen <nils.lehnen@xxxxxxxxx>
---
drivers/staging/sm750fb/ddk750_reg.h | 50 +++++++++++++---------------
1 file changed, 24 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h
index 4bcede37584a..2888ffe32fa2 100644
--- a/drivers/staging/sm750fb/ddk750_reg.h
+++ b/drivers/staging/sm750fb/ddk750_reg.h
@@ -294,15 +294,15 @@
#define CURRENT_GATE 0x000040
#define CURRENT_GATE_MCLK_MASK (0x3 << 14)
- #define CURRENT_GATE_MCLK_DIV_3 (0x0 << 14)
- #define CURRENT_GATE_MCLK_DIV_4 (0x1 << 14)
- #define CURRENT_GATE_MCLK_DIV_6 (0x2 << 14)
- #define CURRENT_GATE_MCLK_DIV_8 (0x3 << 14)
+#define CURRENT_GATE_MCLK_DIV_3 (0x0 << 14)
+#define CURRENT_GATE_MCLK_DIV_4 (0x1 << 14)
+#define CURRENT_GATE_MCLK_DIV_6 (0x2 << 14)
+#define CURRENT_GATE_MCLK_DIV_8 (0x3 << 14)
#define CURRENT_GATE_M2XCLK_MASK (0x3 << 12)
- #define CURRENT_GATE_M2XCLK_DIV_1 (0x0 << 12)
- #define CURRENT_GATE_M2XCLK_DIV_2 (0x1 << 12)
- #define CURRENT_GATE_M2XCLK_DIV_3 (0x2 << 12)
- #define CURRENT_GATE_M2XCLK_DIV_4 (0x3 << 12)
+#define CURRENT_GATE_M2XCLK_DIV_1 (0x0 << 12)
+#define CURRENT_GATE_M2XCLK_DIV_2 (0x1 << 12)
+#define CURRENT_GATE_M2XCLK_DIV_3 (0x2 << 12)
+#define CURRENT_GATE_M2XCLK_DIV_4 (0x3 << 12)
#define CURRENT_GATE_VGA BIT(10)
#define CURRENT_GATE_PWM BIT(9)
#define CURRENT_GATE_I2C BIT(8)
@@ -383,10 +383,10 @@
#define PLL_CTRL_BYPASS BIT(18)
#define PLL_CTRL_POWER BIT(17)
#define PLL_CTRL_INPUT BIT(16)
- #define PLL_CTRL_POD_SHIFT 14
- #define PLL_CTRL_POD_MASK (0x3 << 14)
- #define PLL_CTRL_OD_SHIFT 12
- #define PLL_CTRL_OD_MASK (0x3 << 12)
+#define PLL_CTRL_POD_SHIFT 14
+#define PLL_CTRL_POD_MASK (0x3 << 14)
+#define PLL_CTRL_OD_SHIFT 12
+#define PLL_CTRL_OD_MASK (0x3 << 12)
#define PLL_CTRL_N_SHIFT 8
#define PLL_CTRL_N_MASK (0xf << 8)
#define PLL_CTRL_M_SHIFT 0
@@ -400,7 +400,6 @@
#define SCRATCH_DATA 0x00006c
-
#define MXCLK_PLL_CTRL 0x000070
#define VGA_CONFIGURATION 0x000088
@@ -408,7 +407,6 @@
#define VGA_CONFIGURATION_PLL BIT(2)
#define VGA_CONFIGURATION_MODE BIT(1)
-
#define GPIO_DATA 0x010000
#define GPIO_DATA_31 BIT(31)
#define GPIO_DATA_30 BIT(30)
@@ -996,7 +994,7 @@
#define CRT_DISPLAY_CTRL_CRTSELECT BIT(25)
#define CRT_DISPLAY_CTRL_RGBBIT BIT(24)
- #define CRT_DISPLAY_CTRL_CENTERING BIT(24)
+#define CRT_DISPLAY_CTRL_CENTERING BIT(24)
#define CRT_DISPLAY_CTRL_LOCK_TIMING BIT(23)
#define CRT_DISPLAY_CTRL_EXPANSION BIT(22)
#define CRT_DISPLAY_CTRL_VERTICAL_MODE BIT(21)
@@ -1095,26 +1093,26 @@
/* This vertical expansion below start at 0x080240 ~ 0x080264 */
#define CRT_VERTICAL_EXPANSION 0x080240
- #define CRT_VERTICAL_CENTERING_VALUE_MASK (0xff << 24)
+#define CRT_VERTICAL_CENTERING_VALUE_MASK (0xff << 24)
#define CRT_VERTICAL_EXPANSION_COMPARE_VALUE_MASK (0xff << 16)
#define CRT_VERTICAL_EXPANSION_LINE_BUFFER_MASK (0xf << 12)
#define CRT_VERTICAL_EXPANSION_SCALE_FACTOR_MASK 0xfff
/* This horizontal expansion below start at 0x080268 ~ 0x08027C */
#define CRT_HORIZONTAL_EXPANSION 0x080268
- #define CRT_HORIZONTAL_CENTERING_VALUE_MASK (0xff << 24)
+#define CRT_HORIZONTAL_CENTERING_VALUE_MASK (0xff << 24)
#define CRT_HORIZONTAL_EXPANSION_COMPARE_VALUE_MASK (0xff << 16)
#define CRT_HORIZONTAL_EXPANSION_SCALE_FACTOR_MASK 0xfff
- /* Auto Centering */
- #define CRT_AUTO_CENTERING_TL 0x080280
- #define CRT_AUTO_CENTERING_TL_TOP_MASK (0x7ff << 16)
- #define CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7ff
+/* Auto Centering */
+#define CRT_AUTO_CENTERING_TL 0x080280
+#define CRT_AUTO_CENTERING_TL_TOP_MASK (0x7ff << 16)
+#define CRT_AUTO_CENTERING_TL_LEFT_MASK 0x7ff
- #define CRT_AUTO_CENTERING_BR 0x080284
- #define CRT_AUTO_CENTERING_BR_BOTTOM_MASK (0x7ff << 16)
- #define CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT 16
- #define CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7ff
+#define CRT_AUTO_CENTERING_BR 0x080284
+#define CRT_AUTO_CENTERING_BR_BOTTOM_MASK (0x7ff << 16)
+#define CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT 16
+#define CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7ff
/* sm750le new register to control panel output */
#define DISPLAY_CONTROL_750LE 0x80288
@@ -1294,7 +1292,7 @@
#define ZV0_CAPTURE_BUF1_ADDRESS_ADDRESS_MASK 0x3ffffff
#define ZV0_CAPTURE_BUF_OFFSET 0x090014
- #define ZV0_CAPTURE_BUF_OFFSET_YCLIP_ODD_FIELD (0x3ff << 16)
+#define ZV0_CAPTURE_BUF_OFFSET_YCLIP_ODD_FIELD (0x3ff << 16)
#define ZV0_CAPTURE_BUF_OFFSET_OFFSET_MASK 0xffff
#define ZV0_CAPTURE_FIFO_CTRL 0x090018
--
2.43.0