[PATCH] arm64: dts: rockchip: fix label of sys_led for nanopi-r4s

[Vic B]

The sys_led of NanoPi R4S is labeled as SYS on the board and on the
original case, and it is green, not red.

The board also has a red power led, but that one is connected to 3V3
and cannot be controled via GPIO.

The above can checked on page 17 of board's schematics at
https://wiki.friendlyelec.com/wiki/images/0/06/NanoPi-R4S-1GB-2008-Schematic.pdf

This patch changes the label for sys_led from red:power to green:sys.

Signed-off-by: Vic B <linux@xxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
index 4274d1b6e80a..6fbc76e2e679 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -31,7 +31,7 @@ lan_led: led-lan {
 
 		sys_led: led-sys {
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-			label = "red:power";
+			label = "green:sys";
 			default-state = "on";
 		};
 
-- 
2.47.3