Re: [PATCH v5 0/4] iio: flow: Sensirion SLF3S liquid flow sensor

[Jonathan Cameron]

On Tue, 14 Jul 2026 10:53:54 +0200
Wadim Mueller <wafgo01@xxxxxxxxx> wrote:

> Hi all,
> 
> this series adds a driver for the Sensirion SLF3S family of I2C liquid
> flow sensors (SLF3S-0600F / -1300F / -4000B) and a new IIO_VOLUMEFLOW
> channel type.

Hi Wadim

Something seems to have gone wrong somewhere. I'm not seeing patch 4
and it didn't reach patchwork either.

Thanks,

Jonathan

> 
> The series is now based on iio.git testing, which already contains
> Rodrigo Alencar's IIO_VAL_DECIMAL64_* core formatting work, so the
> external dependency listed in v4 is gone.  Patch 3/4 adds the
> IIO_VAL_DECIMAL64_FEMTO format type on top of it.
> 
> The compatible/fallback layout of the dt-binding is intentionally
> unchanged from v4 while the discussion on the v4 thread about the
> preferred fallback scheme is still open:
> 
>   https://lore.kernel.org/linux-iio/20260621145117.70b2d50e@jic23-huawei/
> 
> Changes since v4
> ----------------
>   * rebased onto iio.git testing; trivial conflict with the new
>     IIO_COVERAGE entries in the channel-type lists resolved (1/4)
>   * driver: include err.h for PTR_ERR() and math.h for struct
>     s32_fract, per Andy
>   * driver: fold the per-variant scale_num/scale_den pair into a
>     struct s32_fract, per Andy
>   * driver: add enum slf3s_variant_id and use it for the variant
>     table and the I2C/OF match tables instead of bare indices, per
>     Andy
>   * driver: slf3s_send_cmd(): drop the "at_least 2" parameter
>     annotation, decouple the ret assignment from its declaration and
>     check errors first, per Andy
>   * driver: use sizeof() instead of ARRAY_SIZE() for the measurement
>     byte buffer, per Andy
>   * driver: parenthesise the (FEMTO / MILLI) factor so it folds into
>     a single constant multiplication, per Andy
>   * driver: derive the temperature scale from MILLIDEGREE_PER_DEGREE
>     instead of a bare 1000, per Andy
>   * driver: checked the struct slf3s_data layout (re Andy's pahole
>     question): the non-pointer members total 260 bytes, so one 4-byte
>     hole remains for any member order; left as is
>   * driver: drop the inline comment on the mutex that duplicated the
>     kernel-doc, per Jonathan
>   * driver: fix the duplicated argument in the DT/sensor variant
>     mismatch dev_info(), per Jonathan
>   * driver: reformat the i2c_device_id/of_device_id tables to one
>     member per line, per Jonathan
>   * MAINTAINERS: updated Maxwells address in the R: entry to
>     maxwell@xxxxxxxxxxx, as he requested on the v4 thread
> 
> The signaling-flags word (air-in-line / high-flow / smoothing status) in
> each measurement frame is intentionally not read; exposing it can be a
> later follow-up.
> 
> Thanks,
> Wadim
> 
> Wadim Mueller (4):
>   iio: types: add IIO_VOLUMEFLOW channel type
>   dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
>   iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
>   iio: flow: add Sensirion SLF3S liquid flow sensor driver
> 
>  Documentation/ABI/testing/sysfs-bus-iio       |  11 +
>  Documentation/ABI/testing/sysfs-bus-iio-flow  |  21 +
>  .../bindings/iio/flow/sensirion,slf3s.yaml    |  58 ++
>  MAINTAINERS                                   |   8 +
>  drivers/iio/Kconfig                           |   1 +
>  drivers/iio/Makefile                          |   1 +
>  drivers/iio/flow/Kconfig                      |  22 +
>  drivers/iio/flow/Makefile                     |   7 +
>  drivers/iio/flow/slf3s.c                      | 541 ++++++++++++++++++
>  drivers/iio/industrialio-core.c               |   3 +
>  include/linux/iio/types.h                     |   1 +
>  include/uapi/linux/iio/types.h                |   1 +
>  tools/iio/iio_event_monitor.c                 |   2 +
>  13 files changed, 677 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-flow
>  create mode 100644 Documentation/devicetree/bindings/iio/flow/sensirion,slf3s.yaml
>  create mode 100644 drivers/iio/flow/Kconfig
>  create mode 100644 drivers/iio/flow/Makefile
>  create mode 100644 drivers/iio/flow/slf3s.c
> 
> 
> base-commit: a50909aa46dec46de3c73235fc15a7d6f763d996