[PATCH 1/2] dt-bindings: media: add ITE IT6625/IT6626 HDMI bridge binding

[Hermes Wu via B4 Relay]

From: Hermes Wu <Hermes.wu@xxxxxxxxxx>

Document the devicetree binding for the ITE IT6625/IT6626 HDMI to
MIPI CSI-2 bridge. The device exposes three graph ports: port@0
(MIPI0) and port@1 (MIPI1) are the two selectable CSI-2 D-PHY/C-PHY
outputs, and port@2 is the HDMI connector input. Only port@0 is
required, since a board only needs to wire up as many of the bridge's
outputs as it actually uses.

Signed-off-by: Hermes Wu <Hermes.wu@xxxxxxxxxx>
---
 .../devicetree/bindings/media/i2c/ite,it6625.yaml  | 136 +++++++++++++++++++++
 1 file changed, 136 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/ite,it6625.yaml b/Documentation/devicetree/bindings/media/i2c/ite,it6625.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..102af5dcb380b0ad2462c376e5a87b22d7296f14
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ite,it6625.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ite,it6625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT6625/IT6626 HDMI to dual MIPI CSI-2 bridge
+
+maintainers:
+  - Hermes Wu <Hermes.wu@xxxxxxxxxx>
+
+description: |-
+  The ITE IT6625 and IT6626 are HDMI to MIPI CSI-2 bridge devices.
+  IT6625 supports an HDMI 2.0 input and converts it to one or two D-PHY CSI
+  outputs, while IT6626 supports an HDMI 2.1 input and converts it to one or
+  two C/D-PHY CSI outputs. The bridges are programmable through I2C and
+  expose one HDMI input port and two selectable CSI-2 output ports. The
+  bridge can operate in split mode or clone mode.
+
+properties:
+  compatible:
+    enum:
+      - ite,it6625
+      - ite,it6626
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO connected to the active-low reset line.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 output port MIPI0
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+              clock-noncontinuous: true
+              link-frequencies: true
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 output port MIPI1
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+              clock-noncontinuous: true
+              link-frequencies: true
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: HDMI connector input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+    required:
+      - port@0
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@4c {
+        compatible = "ite,it6625";
+        reg = <0x4c>;
+
+        reset-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            csi_out0: endpoint {
+              remote-endpoint = <&csi2_rx0>;
+              bus-type = <4>; /* MEDIA_BUS_TYPE_CSI2_DPHY */
+              data-lanes = <1 2 3 4>;
+            };
+          };
+        };
+      };
+    };

-- 
2.34.1