[PATCH v1 2/3] iio: light: gp2ap002: re-enable irq if runtime suspend fails

[Nikhil Gautam]

gp2ap002_runtime_suspend() disables the irq before writing OPMOD. If
the write fails, the callback returns an error with the irq still
disabled while the PM core marks the device active again.

re-enable the irq before returning the error so the irq state matches
the active state the PM core restores.

Fixes: 97d642e23037c ("iio: light: Add a driver for Sharp GP2AP002x00F")

Signed-off-by: Nikhil Gautam <nikhilgtr@xxxxxxxxx>
---
 drivers/iio/light/gp2ap002.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iio/light/gp2ap002.c b/drivers/iio/light/gp2ap002.c
index ea971fec0b56..96dab4d1d8ac 100644
--- a/drivers/iio/light/gp2ap002.c
+++ b/drivers/iio/light/gp2ap002.c
@@ -650,6 +650,7 @@ static int gp2ap002_runtime_suspend(struct device *dev)
 	/* Disable chip and IRQ, everything off */
 	ret = regmap_write(gp2ap002->map, GP2AP002_OPMOD, 0x00);
 	if (ret) {
+		enable_irq(gp2ap002->irq);
 		dev_err(gp2ap002->dev, "error setting up operation mode\n");
 		return ret;
 	}
-- 
2.39.5