[PATCH v7 0/2] hwmon: add Altera SoC FPGA hardware monitoring support

[tze . yee . ng]

From: Tze Yee Ng <tze.yee.ng@xxxxxxxxxx>

This series adds hardware monitor support for Altera SoC FPGA devices.
Temperature and voltage sensors are accessed through the Stratix 10
service layer and Secure Device Manager (SDM).

Patch 1 adds async HWMON SMC support to stratix10-svc and registers the
socfpga-hwmon platform device.

Patch 2 adds the socfpga-hwmon driver, documentation, Kconfig, and
MAINTAINERS entry.


Changes in v7:
- In Patch 2, address maintainer and Sashiko review feedback on 
  socfpga-hwmon:
  - Break out of the async poll loop on hard errors and return the real
    poll status instead of rewriting it to -ETIMEDOUT
  - Drop redundant async poll alert/debug messages (SVC already logs)
  - Replace msleep(1) with usleep_range() for short retries
  - On sync-mode timeout, wait for the outstanding SVC callback before
    calling stratix10_svc_done() so a leftover svc_fifo request cannot
    desynchronize later sensor reads; still report -ETIMEDOUT
- No functional changes in Patch 1

Changes in v6:
- Rebase on torvalds/master (given “Linux 7.2-rc4”)
- No functional changes in Patch 1 and Patch 2

Changes in v5:
- Rebase on dinguyen/socfpga_svc_fixes_for_v7.2
- Address Sashiko review feedback on socfpga-hwmon (Patch 2):
  - Poll async responses until HWMON_TIMEOUT instead of a fixed
    3-iteration retry loop (~3 ms), fixing premature timeouts on
    silicon
  - Add MODULE_ALIAS("platform:socfpga-hwmon")
- No functional changes in Patch 1

Changes in v4:
- Address maintainer and review feedback on socfpga-hwmon (Patch 2):
  - Register devm_add_action_or_reset() before
    devm_hwmon_device_register_with_info() to fix devres teardown order
  - Remove unreferenced completion and pre-poll
    wait_for_completion_io_timeout() from async reads; poll directly
    with a retry loop after async_send()
- No functional changes in Patch 1

Changes in v3:
- Address review feedback on socfpga-hwmon (Patch 2):
  - Fix 16-bit Q8.8 temperature sign extension
  - Drop unused async callback; pass NULL to stratix10_svc_async_send()
  - Document and retain pre-poll wait (RSU pattern; firmware needs time
    before async_poll())
  - Align async poll retry behaviour with RSU
  - Use uninterruptible wait_for_completion_timeout() for sync reads
  - Handle -EINVAL and -EOPNOTSUPP when falling back to sync mode
  - Defer SVC channel cleanup via devm_add_action_or_reset()
- No functional changes in Patch 1

Changes in v2:
- Drop altr,stratix10-hwmon DT binding and intel,stratix10-svc hwmon
  child property
- Drop Stratix 10 SoCDK DTS hwmon node
- Register socfpga-hwmon from stratix10-svc (RSU-style)
- Replace DT channel parsing with hardcoded Stratix 10 and Agilex tables
- Rename driver/module to socfpga-hwmon 
  (CONFIG_SENSORS_ALTERA_SOCFPGA_HWMON)
- Add Agilex channel support
- Fix SDM value conversion (Q8.8 degrees Celsius and Q16 volts to hwmon
  millidegrees/millivolts)
- Improve sync-mode error handling via last_err

Previous version:
  https://lore.kernel.org/all/cover.1784516953.git.tze.yee.ng@xxxxxxxxxx/

Tze Yee Ng (2):
  firmware: stratix10-svc: add async HWMON read commands and register
    socfpga-hwmon device
  hwmon: add Altera SoC FPGA hardware monitoring driver

 Documentation/hwmon/index.rst                |   1 +
 Documentation/hwmon/socfpga-hwmon.rst        |  34 ++
 MAINTAINERS                                  |   8 +
 drivers/firmware/stratix10-svc.c             |  46 +-
 drivers/hwmon/Kconfig                        |  10 +
 drivers/hwmon/Makefile                       |   1 +
 drivers/hwmon/socfpga-hwmon.c                | 586 +++++++++++++++++++
 include/linux/firmware/intel/stratix10-smc.h |  38 ++
 8 files changed, 721 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/hwmon/socfpga-hwmon.rst
 create mode 100644 drivers/hwmon/socfpga-hwmon.c

-- 
2.43.7