[PATCH v2 4/4] arm64: dts: qcom: kaanapali-mtp: Add s5kjn5 image sensor on CSIPHY2

[Hangxiang Ma]

Enable the S5KJN5 image sensor which connected to cci0_i2c1 on Kaanapali
MTP. The sensor appears on CCI pins connected to the CSIPHY2 interface
in four lane mode.

Signed-off-by: Hangxiang Ma <hangxiang.ma@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 90 ++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
index 7ccff3d03b78..9d68058f8962 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
@@ -1235,6 +1235,13 @@ &tlmm {
 			       <119 2>, /* SoCCP */
 			       <144 4>; /* CXM UART */
 
+	cam2_reset: cam2-reset-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
 	wlan_en: wlan-en-state {
 		pins = "gpio16";
 		function = "gpio";
@@ -1335,6 +1342,89 @@ wcd_default: wcd-reset-n-active-state {
 	};
 };
 
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c1 {
+	camera@10 {
+		compatible = "samsung,s5kjn5";
+		reg = <0x10>;
+		reset-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam2_default &cam2_reset>;
+		pinctrl-names = "default";
+
+		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
+		assigned-clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		vddio-supply = <&vreg_l2n_1p2>;
+		vddd-supply = <&vreg_l1m_1p0>;
+		vdda-supply = <&vreg_l4m_2p2>;
+		vdda2-supply = <&vreg_l4n_1p8>;
+		afvdd-supply = <&vreg_l7m_2p8>;
+
+		port {
+			s5kjn5_ep: endpoint {
+				link-frequencies = /bits/ 64 <1248000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy2_in_ep>;
+			};
+		};
+	};
+};
+
+&camss {
+	status = "okay";
+
+	ports {
+		/*
+		 * port0 => csiphy0
+		 * port1 => csiphy1
+		 * port2 => csiphy2
+		 * port3 => csiphy3
+		 * port4 => csiphy4
+		 * port5 => csiphy5
+		 */
+		port@2 {
+			camss_csiphy2_inep: endpoint@0 {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy2_out_ep>;
+			};
+		};
+	};
+};
+
+&csiphy2 {
+	vdda-0p9-supply = <&vreg_l3d_0p8>;
+	vdda-1p2-supply = <&vreg_l1d_1p2>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csiphy2_in_ep: endpoint {
+				data-lanes = <0 1 2 3>;
+				clock-lanes = <7>;
+				remote-endpoint = <&s5kjn5_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			csiphy2_out_ep: endpoint {
+				remote-endpoint = <&camss_csiphy2_inep>;
+			};
+		};
+	};
+};
+
 &uart7 {
 	status = "okay";
 };

-- 
2.34.1