Re: [PATCH v2 2/2] arm64: dts: qcom: eliza-evk: Add PCIe1 with TC9563 PCIe switch

[Krishna Chaitanya Chundru]

On 7/9/2026 6:37 PM, Manivannan Sadhasivam wrote:
> On Wed, Jul 08, 2026 at 11:47:17AM +0530, Krishna Chaitanya Chundru wrote:
>> The Eliza EVK board connects PCIe1 (8GT/s x2) to a Toshiba TC9563
>> PCIe switch. Enable PCIe1 and its QMP PHY nodes.
>>
>> TC9563 uses I2C (at address 0x77 on I2C4) for its management interface.
>>
>> Override the base iommu-map with the expanded set covering all the
>> switch's downstream ports (0x1400-0x1408 SID range).
>>
>> The TC9563 RESX# and PERST# are OR-ed internally to assert reset on the
>> switch. Use TC9563 RESX# pin via a TLMM GPIO and skip wiring PERST#
>> from the PCIe controller.
>>
>> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/eliza-evk.dtsi | 112 ++++++++++++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/eliza.dtsi     |   1 +
>>  2 files changed, 113 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/eliza-evk.dtsi b/arch/arm64/boot/dts/qcom/eliza-evk.dtsi
>> index 6d76715ccffb..e099b7c8c371 100644
>> --- a/arch/arm64/boot/dts/qcom/eliza-evk.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/eliza-evk.dtsi
>> @@ -12,6 +12,26 @@ chosen {
>>  		stdout-path = "serial0:115200n8";
>>  	};
>>  
>> +	vreg_0p9: regulator-0v9 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "VREG_0P9";
>> +
>> +		regulator-min-microvolt = <900000>;
>> +		regulator-max-microvolt = <900000>;
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>> +	vreg_1p8: regulator-1v8 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "VREG_1P8";
>> +
>> +		regulator-min-microvolt = <1800000>;
>> +		regulator-max-microvolt = <1800000>;
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>>  	vreg_pcie_m_3p3: regulator-3p3 {
>>  		compatible = "regulator-fixed";
>>  
>> @@ -99,6 +119,98 @@ pcieport0_ep: endpoint {
>>  	};
>>  };
>>  
>> +&pcie1 {
>> +	iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
>> +		    <0x100 &apps_smmu 0x1401 0x1>,
>> +		    <0x208 &apps_smmu 0x1402 0x1>,
>> +		    <0x210 &apps_smmu 0x1403 0x1>,
>> +		    <0x218 &apps_smmu 0x1404 0x1>,
>> +		    <0x300 &apps_smmu 0x1405 0x1>,
>> +		    <0x400 &apps_smmu 0x1406 0x1>,
>> +		    <0x500 &apps_smmu 0x1407 0x1>,
>> +		    <0x501 &apps_smmu 0x1408 0x1>;
>> +
>> +	status = "okay";
>> +};
>> +
>> +&pcie1_phy {
>> +	vdda-phy-supply = <&vreg_l1k>;
>> +	vdda-pll-supply = <&vreg_l3k>;
>> +
>> +	status = "okay";
>> +};
>> +
>> +&pcie1port0 {
>> +	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
> No reset-gpios?
RESX & PERST are ORed in this platform, as we can declare at only
one place we declared it in the tc9563 node as resx-gpios

- Krishna Chaitanya.
> - Mani
>
>> +
>> +	tc9563: pcie@0,0 {
>> +		compatible = "pci1179,0623";
>> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
>> +		#address-cells = <3>;
>> +		#size-cells = <2>;
>> +
>> +		device_type = "pci";
>> +		ranges;
>> +		bus-range = <0x2 0xff>;
>> +
>> +		vddc-supply = <&vreg_0p9>;
>> +		vdd18-supply = <&vreg_1p8>;
>> +		vdd09-supply = <&vreg_0p9>;
>> +		vddio1-supply = <&vreg_1p8>;
>> +		vddio2-supply = <&vreg_1p8>;
>> +		vddio18-supply = <&vreg_1p8>;
>> +
>> +		i2c-parent = <&i2c4 0x77>;
>> +
>> +		resx-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
>> +
>> +		pcie@1,0 {
>> +			reg = <0x20800 0x0 0x0 0x0 0x0>;
>> +			#address-cells = <3>;
>> +			#size-cells = <2>;
>> +
>> +			device_type = "pci";
>> +			ranges;
>> +			bus-range = <0x3 0xff>;
>> +		};
>> +
>> +		pcie@2,0 {
>> +			reg = <0x21000 0x0 0x0 0x0 0x0>;
>> +			#address-cells = <3>;
>> +			#size-cells = <2>;
>> +
>> +			device_type = "pci";
>> +			ranges;
>> +			bus-range = <0x4 0xff>;
>> +		};
>> +
>> +		pcie@3,0 {
>> +			reg = <0x21800 0x0 0x0 0x0 0x0>;
>> +			#address-cells = <3>;
>> +			#size-cells = <2>;
>> +			device_type = "pci";
>> +			ranges;
>> +			bus-range = <0x5 0xff>;
>> +
>> +			pci@0,0 {
>> +				reg = <0x50000 0x0 0x0 0x0 0x0>;
>> +				#address-cells = <3>;
>> +				#size-cells = <2>;
>> +				device_type = "pci";
>> +				ranges;
>> +			};
>> +
>> +			pci@0,1 {
>> +				reg = <0x50100 0x0 0x0 0x0 0x0>;
>> +				#address-cells = <3>;
>> +				#size-cells = <2>;
>> +				device_type = "pci";
>> +				ranges;
>> +			};
>> +		};
>> +	};
>> +};
>> +
>>  &uart13 {
>>  	compatible = "qcom,geni-debug-uart";
>>  
>> diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
>> index cce65e18f979..363cabc5f55c 100644
>> --- a/arch/arm64/boot/dts/qcom/eliza.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
>> @@ -2102,6 +2102,7 @@ opp-16000000-3 {
>>  
>>  			};
>>  			pcie1port0: pcie@0 {
>> +				compatible = "pciclass,0604";
>>  				device_type = "pci";
>>  				reg = <0x0 0x0 0x0 0x0 0x0>;
>>  				bus-range = <0x01 0xff>;
>>
>> -- 
>> 2.34.1
>>